# Source code for sympy.utilities.enumerative

```
from __future__ import print_function, division
from sympy.core.compatibility import range
"""
Algorithms and classes to support enumerative combinatorics.
Currently just multiset partitions, but more could be added.
Terminology (following Knuth, algorithm 7.1.2.5M TAOCP)
*multiset* aaabbcccc has a *partition* aaabc | bccc
The submultisets, aaabc and bccc of the partition are called
*parts*, or sometimes *vectors*. (Knuth notes that multiset
partitions can be thought of as partitions of vectors of integers,
where the ith element of the vector gives the multiplicity of
element i.)
The values a, b and c are *components* of the multiset. These
correspond to elements of a set, but in a multiset can be present
with a multiplicity greater than 1.
The algorithm deserves some explanation.
Think of the part aaabc from the multiset above. If we impose an
ordering on the components of the multiset, we can represent a part
with a vector, in which the value of the first element of the vector
corresponds to the multiplicity of the first component in that
part. Thus, aaabc can be represented by the vector [3, 1, 1]. We
can also define an ordering on parts, based on the lexicographic
ordering of the vector (leftmost vector element, i.e., the element
with the smallest component number, is the most significant), so
that [3, 1, 1] > [3, 1, 0] and [3, 1, 1] > [2, 1, 4]. The ordering
on parts can be extended to an ordering on partitions: First, sort
the parts in each partition, left-to-right in decreasing order. Then
partition A is greater than partition B if A's leftmost/greatest
part is greater than B's leftmost part. If the leftmost parts are
equal, compare the second parts, and so on.
In this ordering, the greatest partion of a given multiset has only
one part. The least partition is the one in which the components
are spread out, one per part.
The enumeration algorithms in this file yield the partitions of the
argument multiset in decreasing order. The main data structure is a
stack of parts, corresponding to the current partition. An
important invariant is that the parts on the stack are themselves in
decreasing order. This data structure is decremented to find the
next smaller partition. Most often, decrementing the partition will
only involve adjustments to the smallest parts at the top of the
stack, much as adjacent integers *usually* differ only in their last
few digits.
Knuth's algorithm uses two main operations on parts:
Decrement - change the part so that it is smaller in the
(vector) lexicographic order, but reduced by the smallest amount possible.
For example, if the multiset has vector [5,
3, 1], and the bottom/greatest part is [4, 2, 1], this part would
decrement to [4, 2, 0], while [4, 0, 0] would decrement to [3, 3,
1]. A singleton part is never decremented -- [1, 0, 0] is not
decremented to [0, 3, 1]. Instead, the decrement operator needs
to fail for this case. In Knuth's psuedocode, the decrement
operator is step m5.
Spread unallocated multiplicity - Once a part has been decremented,
it cannot be the rightmost part in the partition. There is some
multiplicity that has not been allocated, and new parts must be
created above it in the stack to use up this multiplicity. To
maintain the invariant that the parts on the stack are in
decreasing order, these new parts must be less than or equal to
the decremented part.
For example, if the multiset is [5, 3, 1], and its most
significant part has just been decremented to [5, 3, 0], the
spread operation will add a new part so that the stack becomes
[[5, 3, 0], [0, 0, 1]]. If the most significant part (for the
same multiset) has been decremented to [2, 0, 0] the stack becomes
[[2, 0, 0], [2, 0, 0], [1, 3, 1]]. In the psuedocode, the spread
operation for one part is step m2. The complete spread operation
is a loop of steps m2 and m3.
In order to facilitate the spread operation, Knuth stores, for each
component of each part, not just the multiplicity of that component
in the part, but also the total multiplicity available for this
component in this part or any lesser part above it on the stack.
One added twist is that Knuth does not represent the part vectors as
arrays. Instead, he uses a sparse representation, in which a
component of a part is represented as a component number (c), plus
the multiplicity of the component in that part (v) as well as the
total multiplicity available for that component (u). This saves
time that would be spent skipping over zeros.
"""
class PartComponent(object):
"""Internal class used in support of the multiset partitions
enumerators and the associated visitor functions.
Represents one component of one part of the current partition.
A stack of these, plus an auxiliary frame array, f, represents a
partition of the multiset.
Knuth's psuedocode makes c, u, and v separate arrays.
"""
__slots__ = ('c', 'u', 'v')
def __init__(self):
self.c = 0 # Component number
self.u = 0 # The as yet unpartitioned amount in component c
# *before* it is allocated by this triple
self.v = 0 # Amount of c component in the current part
# (v<=u). An invariant of the representation is
# that the next higher triple for this component
# (if there is one) will have a value of u-v in
# its u attribute.
def __repr__(self):
"for debug/algorithm animation purposes"
return 'c:%d u:%d v:%d' % (self.c, self.u, self.v)
def __eq__(self, other):
"""Define value oriented equality, which is useful for testers"""
return (isinstance(other, self.__class__) and
self.c == other.c and
self.u == other.u and
self.v == other.v)
def __ne__(self, other):
"""Defined for consistency with __eq__"""
return not self.__eq__(other)
# This function tries to be a faithful implementation of algorithm
# 7.1.2.5M in Volume 4A, Combinatoral Algorithms, Part 1, of The Art
# of Computer Programming, by Donald Knuth. This includes using
# (mostly) the same variable names, etc. This makes for rather
# low-level Python.
# Changes from Knuth's psuedocode include
# - use PartComponent struct/object instead of 3 arrays
# - make the function a generator
# - map (with some difficulty) the GOTOs to Python control structures.
# - Knuth uses 1-based numbering for components, this code is 0-based
# - renamed variable l to lpart.
# - flag variable x takes on values True/False instead of 1/0
#
[docs]def multiset_partitions_taocp(multiplicities):
"""Enumerates partitions of a multiset.
Parameters
==========
multiplicities
list of integer multiplicities of the components of the multiset.
Yields
======
state
Internal data structure which encodes a particular partition.
This output is then usually processed by a vistor function
which combines the information from this data structure with
the components themselves to produce an actual partition.
Unless they wish to create their own visitor function, users will
have little need to look inside this data structure. But, for
reference, it is a 3-element list with components:
f
is a frame array, which is used to divide pstack into parts.
lpart
points to the base of the topmost part.
pstack
is an array of PartComponent objects.
The ``state`` output offers a peek into the internal data
structures of the enumeration function. The client should
treat this as read-only; any modification of the data
structure will cause unpredictable (and almost certainly
incorrect) results. Also, the components of ``state`` are
modified in place at each iteration. Hence, the visitor must
be called at each loop iteration. Accumulating the ``state``
instances and processing them later will not work.
Examples
========
>>> from sympy.utilities.enumerative import list_visitor
>>> from sympy.utilities.enumerative import multiset_partitions_taocp
>>> # variables components and multiplicities represent the multiset 'abb'
>>> components = 'ab'
>>> multiplicities = [1, 2]
>>> states = multiset_partitions_taocp(multiplicities)
>>> list(list_visitor(state, components) for state in states)
[[['a', 'b', 'b']],
[['a', 'b'], ['b']],
[['a'], ['b', 'b']],
[['a'], ['b'], ['b']]]
See Also
========
sympy.utilities.iterables.multiset_partitions: Takes a multiset
as input and directly yields multiset partitions. It
dispatches to a number of functions, including this one, for
implementation. Most users will find it more convenient to
use than multiset_partitions_taocp.
"""
# Important variables.
# m is the number of components, i.e., number of distinct elements
m = len(multiplicities)
# n is the cardinality, total number of elements whether or not distinct
n = sum(multiplicities)
# The main data structure, f segments pstack into parts. See
# list_visitor() for example code indicating how this internal
# state corresponds to a partition.
# Note: allocation of space for stack is conservative. Knuth's
# exercise 7.2.1.5.68 gives some indication of how to tighten this
# bound, but this is not implemented.
pstack = [PartComponent() for i in range(n * m + 1)]
f = [0] * (n + 1)
# Step M1 in Knuth (Initialize)
# Initial state - entire multiset in one part.
for j in range(m):
ps = pstack[j]
ps.c = j
ps.u = multiplicities[j]
ps.v = multiplicities[j]
# Other variables
f[0] = 0
a = 0
lpart = 0
f[1] = m
b = m # in general, current stack frame is from a to b - 1
while True:
while True:
# Step M2 (Subtract v from u)
j = a
k = b
x = False
while j < b:
pstack[k].u = pstack[j].u - pstack[j].v
if pstack[k].u == 0:
x = True
elif not x:
pstack[k].c = pstack[j].c
pstack[k].v = min(pstack[j].v, pstack[k].u)
x = pstack[k].u < pstack[j].v
k = k + 1
else: # x is True
pstack[k].c = pstack[j].c
pstack[k].v = pstack[k].u
k = k + 1
j = j + 1
# Note: x is True iff v has changed
# Step M3 (Push if nonzero.)
if k > b:
a = b
b = k
lpart = lpart + 1
f[lpart + 1] = b
# Return to M2
else:
break # Continue to M4
# M4 Visit a partition
state = [f, lpart, pstack]
yield state
# M5 (Decrease v)
while True:
j = b-1
while (pstack[j].v == 0):
j = j - 1
if j == a and pstack[j].v == 1:
# M6 (Backtrack)
if lpart == 0:
return
lpart = lpart - 1
b = a
a = f[lpart]
# Return to M5
else:
pstack[j].v = pstack[j].v - 1
for k in range(j + 1, b):
pstack[k].v = pstack[k].u
break # GOTO M2
# --------------- Visitor functions for multiset partitions ---------------
# A visitor takes the partition state generated by
# multiset_partitions_taocp or other enumerator, and produces useful
# output (such as the actual partition).
[docs]def factoring_visitor(state, primes):
"""Use with multiset_partitions_taocp to enumerate the ways a
number can be expressed as a product of factors. For this usage,
the exponents of the prime factors of a number are arguments to
the partition enumerator, while the corresponding prime factors
are input here.
Examples
========
To enumerate the factorings of a number we can think of the elements of the
partition as being the prime factors and the multiplicities as being their
exponents.
>>> from sympy.utilities.enumerative import factoring_visitor
>>> from sympy.utilities.enumerative import multiset_partitions_taocp
>>> from sympy import factorint
>>> primes, multiplicities = zip(*factorint(24).items())
>>> primes
(2, 3)
>>> multiplicities
(3, 1)
>>> states = multiset_partitions_taocp(multiplicities)
>>> list(factoring_visitor(state, primes) for state in states)
[[24], [8, 3], [12, 2], [4, 6], [4, 2, 3], [6, 2, 2], [2, 2, 2, 3]]
"""
f, lpart, pstack = state
factoring = []
for i in range(lpart + 1):
factor = 1
for ps in pstack[f[i]: f[i + 1]]:
if ps.v > 0:
factor *= primes[ps.c] ** ps.v
factoring.append(factor)
return factoring
[docs]def list_visitor(state, components):
"""Return a list of lists to represent the partition.
Examples
========
>>> from sympy.utilities.enumerative import list_visitor
>>> from sympy.utilities.enumerative import multiset_partitions_taocp
>>> states = multiset_partitions_taocp([1, 2, 1])
>>> s = next(states)
>>> list_visitor(s, 'abc') # for multiset 'a b b c'
[['a', 'b', 'b', 'c']]
>>> s = next(states)
>>> list_visitor(s, [1, 2, 3]) # for multiset '1 2 2 3
[[1, 2, 2], [3]]
"""
f, lpart, pstack = state
partition = []
for i in range(lpart+1):
part = []
for ps in pstack[f[i]:f[i+1]]:
if ps.v > 0:
part.extend([components[ps.c]] * ps.v)
partition.append(part)
return partition
[docs]class MultisetPartitionTraverser():
"""
Has methods to ``enumerate`` and ``count`` the partitions of a multiset.
This implements a refactored and extended version of Knuth's algorithm
7.1.2.5M [AOCP]_."
The enumeration methods of this class are generators and return
data structures which can be interpreted by the same visitor
functions used for the output of ``multiset_partitions_taocp``.
See Also
========
multiset_partitions_taocp
sympy.utilities.iterables.multiset_partititions
Examples
========
>>> from sympy.utilities.enumerative import MultisetPartitionTraverser
>>> m = MultisetPartitionTraverser()
>>> m.count_partitions([4,4,4,2])
127750
>>> m.count_partitions([3,3,3])
686
References
==========
.. [AOCP] Algorithm 7.1.2.5M in Volume 4A, Combinatoral Algorithms,
Part 1, of The Art of Computer Programming, by Donald Knuth.
.. [Factorisatio] On a Problem of Oppenheim concerning
"Factorisatio Numerorum" E. R. Canfield, Paul Erdos, Carl
Pomerance, JOURNAL OF NUMBER THEORY, Vol. 17, No. 1. August
1983. See section 7 for a description of an algorithm
similar to Knuth's.
.. [Yorgey] Generating Multiset Partitions, Brent Yorgey, The
Monad.Reader, Issue 8, September 2007.
"""
def __init__(self):
self.debug = False
# TRACING variables. These are useful for gathering
# statistics on the algorithm itself, but have no particular
# benefit to a user of the code.
self.k1 = 0
self.k2 = 0
self.p1 = 0
def db_trace(self, msg):
"""Useful for usderstanding/debugging the algorithms. Not
generally activated in end-user code."""
if self.debug:
letters = 'abcdefghijklmnopqrstuvwxyz'
state = [self.f, self.lpart, self.pstack]
print("DBG:", msg,
["".join(part) for part in list_visitor(state, letters)],
animation_visitor(state))
#
# Helper methods for enumeration
#
def _initialize_enumeration(self, multiplicities):
"""Allocates and initializes the partition stack.
This is called from the enumeration/counting routines, so
there is no need to call it separately."""
num_components = len(multiplicities)
# cardinality is the total number of elements, whether or not distinct
cardinality = sum(multiplicities)
# pstack is the partition stack, which is segmented by
# f into parts.
self.pstack = [PartComponent() for i in
range(num_components * cardinality + 1)]
self.f = [0] * (cardinality + 1)
# Initial state - entire multiset in one part.
for j in range(num_components):
ps = self.pstack[j]
ps.c = j
ps.u = multiplicities[j]
ps.v = multiplicities[j]
self.f[0] = 0
self.f[1] = num_components
self.lpart = 0
# The decrement_part() method corresponds to step M5 in Knuth's
# algorithm. This is the base version for enum_all(). Modified
# versions of this method are needed if we want to restrict
# sizes of the partitions produced.
def decrement_part(self, part):
"""Decrements part (a subrange of pstack), if possible, returning
True iff the part was successfully decremented.
If you think of the v values in the part as a multi-digit
integer (least significant digit on the right) this is
basically decrementing that integer, but with the extra
constraint that the leftmost digit cannot be decremented to 0.
Parameters
==========
part
The part, represented as a list of PartComponent objects,
which is to be decremented.
"""
plen = len(part)
for j in range(plen - 1, -1, -1):
if (j == 0 and part[j].v > 1) or (j > 0 and part[j].v > 0):
# found val to decrement
part[j].v -= 1
# Reset trailing parts back to maximum
for k in range(j + 1, plen):
part[k].v = part[k].u
return True
return False
# Version to allow number of parts to be bounded from above.
# Corresponds to (a modified) step M5.
def decrement_part_small(self, part, ub):
"""Decrements part (a subrange of pstack), if possible, returning
True iff the part was successfully decremented.
Parameters
==========
part
part to be decremented (topmost part on the stack)
ub
the maximum number of parts allowed in a partition
returned by the calling traversal.
Notes
=====
The goal of this modification of the ordinary decrement method
is to fail (meaning that the subtree rooted at this part is to
be skipped) when it can be proved that this part can only have
child partitions which are larger than allowed by ``ub``. If a
decision is made to fail, it must be accurate, otherwise the
enumeration will miss some partitions. But, it is OK not to
capture all the possible failures -- if a part is passed that
shouldn't be, the resulting too-large partitions are filtered
by the enumeration one level up. However, as is usual in
constrained enumerations, failing early is advantageous.
The tests used by this method catch the most common cases,
although this implementation is by no means the last word on
this problem. The tests include:
1) ``lpart`` must be less than ``ub`` by at least 2. This is because
once a part has been decremented, the partition
will gain at least one child in the spread step.
2) If the leading component of the part is about to be
decremented, check for how many parts will be added in
order to use up the unallocated multiplicity in that
leading component, and fail if this number is greater than
allowed by ``ub``. (See code for the exact expression.) This
test is given in the answer to Knuth's problem 7.2.1.5.69.
3) If there is *exactly* enough room to expand the leading
component by the above test, check the next component (if
it exists) once decrementing has finished. If this has
``v == 0``, this next component will push the expansion over the
limit by 1, so fail.
"""
if self.lpart >= ub - 1:
self.p1 += 1 # increment to keep track of usefulness of tests
return False
plen = len(part)
for j in range(plen - 1, -1, -1):
# Knuth's mod, (answer to problem 7.2.1.5.69)
if (j == 0) and (part[0].v - 1)*(ub - self.lpart) < part[0].u:
self.k1 += 1
return False
if (j == 0 and part[j].v > 1) or (j > 0 and part[j].v > 0):
# found val to decrement
part[j].v -= 1
# Reset trailing parts back to maximum
for k in range(j + 1, plen):
part[k].v = part[k].u
# Have now decremented part, but are we doomed to
# failure when it is expanded? Check one oddball case
# that turns out to be surprisingly common - exactly
# enough room to expand the leading component, but no
# room for the second component, which has v=0.
if (plen > 1 and (part[1].v == 0) and
(part[0].u - part[0].v) ==
((ub - self.lpart - 1) * part[0].v)):
self.k2 += 1
self.db_trace("Decrement fails test 3")
return False
return True
return False
def decrement_part_large(self, part, amt, lb):
"""Decrements part, while respecting size constraint.
A part can have no children which are of sufficient size (as
indicated by ``lb``) unless that part has sufficient
unallocated multiplicity. When enforcing the size constraint,
this method will decrement the part (if necessary) by an
amount needed to ensure sufficient unallocated multiplicity.
Returns True iff the part was successfully decremented.
Parameters
==========
part
part to be decremented (topmost part on the stack)
amt
Can only take values 0 or 1. A value of 1 means that the
part must be decremented, and then the size constraint is
enforced. A value of 0 means just to enforce the ``lb``
size constraint.
lb
The partitions produced by the calling enumeration must
have more parts than this value.
"""
if amt == 1:
# In this case we always need to increment, *before*
# enforcing the "sufficient unallocated multiplicity"
# constraint. Easiest for this is just to call the
# regular decrement method.
if not self.decrement_part(part):
return False
# Next, perform any needed additional decrementing to respect
# "sufficient unallocated multiplicity" (or fail if this is
# not possible).
min_unalloc = lb - self.lpart
if min_unalloc <= 0:
return True
total_mult = sum(pc.u for pc in part)
total_alloc = sum(pc.v for pc in part)
if total_mult <= min_unalloc:
return False
deficit = min_unalloc - (total_mult - total_alloc)
if deficit <= 0:
return True
for i in range(len(part) - 1, -1, -1):
if i == 0:
if part[0].v > deficit:
part[0].v -= deficit
return True
else:
return False # This shouldn't happen, due to above check
else:
if part[i].v >= deficit:
part[i].v -= deficit
return True
else:
deficit -= part[i].v
part[i].v = 0
def decrement_part_range(self, part, lb, ub):
"""Decrements part (a subrange of pstack), if possible, returning
True iff the part was successfully decremented.
Parameters
==========
part
part to be decremented (topmost part on the stack)
ub
the maximum number of parts allowed in a partition
returned by the calling traversal.
lb
The partitions produced by the calling enumeration must
have more parts than this value.
Notes
=====
Combines the constraints of _small and _large decrement
methods. If returns success, part has been decremented at
least once, but perhaps by quite a bit more if needed to meet
the lb constraint.
"""
# Constraint in the range case is just enforcing both the
# constraints from _small and _large cases. Note the 0 as the
# second argument to the _large call -- this is the signal to
# decrement only as needed to for constraint enforcement. The
# short circuiting and left-to-right order of the 'and'
# operator is important for this to work correctly.
return self.decrement_part_small(part, ub) and \
self.decrement_part_large(part, 0, lb)
def spread_part_multiplicity(self):
"""Returns True if a new part has been created, and
adjusts pstack, f and lpart as needed.
Notes
=====
Spreads unallocated multiplicity from the current top part
into a new part created above the current on the stack. This
new part is constrained to be less than or equal to the old in
terms of the part ordering.
This call does nothing (and returns False) if the current top
part has no unallocated multiplicity.
"""
j = self.f[self.lpart] # base of current top part
k = self.f[self.lpart + 1] # ub of current; potential base of next
base = k # save for later comparison
changed = False # Set to true when the new part (so far) is
# strictly less than (as opposed to less than
# or equal) to the old.
for j in range(self.f[self.lpart], self.f[self.lpart + 1]):
self.pstack[k].u = self.pstack[j].u - self.pstack[j].v
if self.pstack[k].u == 0:
changed = True
else:
self.pstack[k].c = self.pstack[j].c
if changed: # Put all available multiplicity in this part
self.pstack[k].v = self.pstack[k].u
else: # Still maintaining ordering constraint
if self.pstack[k].u < self.pstack[j].v:
self.pstack[k].v = self.pstack[k].u
changed = True
else:
self.pstack[k].v = self.pstack[j].v
k = k + 1
if k > base:
# Adjust for the new part on stack
self.lpart = self.lpart + 1
self.f[self.lpart + 1] = k
return True
return False
def top_part(self):
"""Return current top part on the stack, as a slice of pstack.
"""
return self.pstack[self.f[self.lpart]:self.f[self.lpart + 1]]
# Same interface and funtionality as multiset_partitions_taocp(),
# but some might find this refactored version easier to follow.
[docs] def enum_all(self, multiplicities):
"""Enumerate the partitions of a multiset.
Examples
========
>>> from sympy.utilities.enumerative import list_visitor
>>> from sympy.utilities.enumerative import MultisetPartitionTraverser
>>> m = MultisetPartitionTraverser()
>>> states = m.enum_all([2,2])
>>> list(list_visitor(state, 'ab') for state in states)
[[['a', 'a', 'b', 'b']],
[['a', 'a', 'b'], ['b']],
[['a', 'a'], ['b', 'b']],
[['a', 'a'], ['b'], ['b']],
[['a', 'b', 'b'], ['a']],
[['a', 'b'], ['a', 'b']],
[['a', 'b'], ['a'], ['b']],
[['a'], ['a'], ['b', 'b']],
[['a'], ['a'], ['b'], ['b']]]
See also
========
multiset_partitions_taocp():
which provides the same result as this method, but is
about twice as fast. Hence, enum_all is primarily useful
for testing. Also see the function for a discussion of
states and visitors.
"""
self._initialize_enumeration(multiplicities)
while True:
while self.spread_part_multiplicity():
pass
# M4 Visit a partition
state = [self.f, self.lpart, self.pstack]
yield state
# M5 (Decrease v)
while not self.decrement_part(self.top_part()):
# M6 (Backtrack)
if self.lpart == 0:
return
self.lpart -= 1
[docs] def enum_small(self, multiplicities, ub):
"""Enumerate multiset partitions with no more than ``ub`` parts.
Equivalent to enum_range(multiplicities, 0, ub)
See also
========
enum_all, enum_large, enum_range
Parameters
==========
multiplicities
list of multiplicities of the components of the multiset.
ub
Maximum number of parts
Examples
========
>>> from sympy.utilities.enumerative import list_visitor
>>> from sympy.utilities.enumerative import MultisetPartitionTraverser
>>> m = MultisetPartitionTraverser()
>>> states = m.enum_small([2,2], 2)
>>> list(list_visitor(state, 'ab') for state in states)
[[['a', 'a', 'b', 'b']],
[['a', 'a', 'b'], ['b']],
[['a', 'a'], ['b', 'b']],
[['a', 'b', 'b'], ['a']],
[['a', 'b'], ['a', 'b']]]
The implementation is based, in part, on the answer given to
exercise 69, in Knuth [AOCP]_.
"""
# Keep track of iterations which do not yield a partition.
# Clearly, we would like to keep this number small.
self.discarded = 0
if ub <= 0:
return
self._initialize_enumeration(multiplicities)
while True:
good_partition = True
while self.spread_part_multiplicity():
self.db_trace("spread 1")
if self.lpart >= ub:
self.discarded += 1
good_partition = False
self.db_trace(" Discarding")
self.lpart = ub - 2
break
# M4 Visit a partition
if good_partition:
state = [self.f, self.lpart, self.pstack]
yield state
# M5 (Decrease v)
while not self.decrement_part_small(self.top_part(), ub):
self.db_trace("Failed decrement, going to backtrack")
# M6 (Backtrack)
if self.lpart == 0:
return
self.lpart -= 1
self.db_trace("Backtracked to")
self.db_trace("decrement ok, about to expand")
[docs] def enum_large(self, multiplicities, lb):
"""Enumerate the partitions of a multiset with lb < num(parts)
Equivalent to enum_range(multiplicities, lb, sum(multiplicities))
See also
========
enum_all, enum_small, enum_range
Parameters
==========
multiplicities
list of multiplicities of the components of the multiset.
lb
Number of parts in the partition must be greater than
this lower bound.
Examples
========
>>> from sympy.utilities.enumerative import list_visitor
>>> from sympy.utilities.enumerative import MultisetPartitionTraverser
>>> m = MultisetPartitionTraverser()
>>> states = m.enum_large([2,2], 2)
>>> list(list_visitor(state, 'ab') for state in states)
[[['a', 'a'], ['b'], ['b']],
[['a', 'b'], ['a'], ['b']],
[['a'], ['a'], ['b', 'b']],
[['a'], ['a'], ['b'], ['b']]]
"""
self.discarded = 0
if lb >= sum(multiplicities):
return
self._initialize_enumeration(multiplicities)
self.decrement_part_large(self.top_part(), 0, lb)
while True:
good_partition = True
while self.spread_part_multiplicity():
if not self.decrement_part_large(self.top_part(), 0, lb):
# Failure here should be rare/impossible
self.discarded += 1
good_partition = False
break
# M4 Visit a partition
if good_partition:
state = [self.f, self.lpart, self.pstack]
yield state
# M5 (Decrease v)
while not self.decrement_part_large(self.top_part(), 1, lb):
# M6 (Backtrack)
if self.lpart == 0:
return
self.lpart -= 1
[docs] def enum_range(self, multiplicities, lb, ub):
"""Enumerate the partitions of a multiset with
``lb < num(parts) <= ub``.
In particular, if partitions with exactly ``k`` parts are
desired, call with ``(multiplicities, k - 1, k)``. This
method generalizes enum_all, enum_small, and enum_large.
Examples
========
>>> from sympy.utilities.enumerative import list_visitor
>>> from sympy.utilities.enumerative import MultisetPartitionTraverser
>>> m = MultisetPartitionTraverser()
>>> states = m.enum_range([2,2], 1, 2)
>>> list(list_visitor(state, 'ab') for state in states)
[[['a', 'a', 'b'], ['b']],
[['a', 'a'], ['b', 'b']],
[['a', 'b', 'b'], ['a']],
[['a', 'b'], ['a', 'b']]]
"""
# combine the constraints of the _large and _small
# enumerations.
self.discarded = 0
if ub <= 0 or lb >= sum(multiplicities):
return
self._initialize_enumeration(multiplicities)
self.decrement_part_large(self.top_part(), 0, lb)
while True:
good_partition = True
while self.spread_part_multiplicity():
self.db_trace("spread 1")
if not self.decrement_part_large(self.top_part(), 0, lb):
# Failure here - possible in range case?
self.db_trace(" Discarding (large cons)")
self.discarded += 1
good_partition = False
break
elif self.lpart >= ub:
self.discarded += 1
good_partition = False
self.db_trace(" Discarding small cons")
self.lpart = ub - 2
break
# M4 Visit a partition
if good_partition:
state = [self.f, self.lpart, self.pstack]
yield state
# M5 (Decrease v)
while not self.decrement_part_range(self.top_part(), lb, ub):
self.db_trace("Failed decrement, going to backtrack")
# M6 (Backtrack)
if self.lpart == 0:
return
self.lpart -= 1
self.db_trace("Backtracked to")
self.db_trace("decrement ok, about to expand")
def count_partitions_slow(self, multiplicities):
"""Returns the number of partitions of a multiset whose elements
have the multiplicities given in ``multiplicities``.
Primarily for comparison purposes. It follows the same path as
enumerate, and counts, rather than generates, the partitions.
See Also
========
count_partitions
Has the same calling interface, but is much faster.
"""
# number of partitions so far in the enumeration
self.pcount = 0
self._initialize_enumeration(multiplicities)
while True:
while self.spread_part_multiplicity():
pass
# M4 Visit (count) a partition
self.pcount += 1
# M5 (Decrease v)
while not self.decrement_part(self.top_part()):
# M6 (Backtrack)
if self.lpart == 0:
return self.pcount
self.lpart -= 1
[docs] def count_partitions(self, multiplicities):
"""Returns the number of partitions of a multiset whose components
have the multiplicities given in ``multiplicities``.
For larger counts, this method is much faster than calling one
of the enumerators and counting the result. Uses dynamic
programming to cut down on the number of nodes actually
explored. The dictionary used in order to accelerate the
counting process is stored in the ``MultisetPartitionTraverser``
object and persists across calls. If the the user does not
expect to call ``count_partitions`` for any additional
multisets, the object should be cleared to save memory. On
the other hand, the cache built up from one count run can
significantly speed up subsequent calls to ``count_partitions``,
so it may be advantageous not to clear the object.
Examples
========
>>> from sympy.utilities.enumerative import MultisetPartitionTraverser
>>> m = MultisetPartitionTraverser()
>>> m.count_partitions([9,8,2])
288716
>>> m.count_partitions([2,2])
9
>>> del m
Notes
=====
If one looks at the workings of Knuth's algorithm M [AOCP]_, it
can be viewed as a traversal of a binary tree of parts. A
part has (up to) two children, the left child resulting from
the spread operation, and the right child from the decrement
operation. The ordinary enumeration of multiset partitions is
an in-order traversal of this tree, and with the partitions
corresponding to paths from the root to the leaves. The
mapping from paths to partitions is a little complicated,
since the partition would contain only those parts which are
leaves or the parents of a spread link, not those which are
parents of a decrement link.
For counting purposes, it is sufficient to count leaves, and
this can be done with a recursive in-order traversal. The
number of leaves of a subtree rooted at a particular part is a
function only of that part itself, so memoizing has the
potential to speed up the counting dramatically.
This method follows a computational approach which is similar
to the hypothetical memoized recursive function, but with two
differences:
1) This method is iterative, borrowing its structure from the
other enumerations and maintaining an explicit stack of
parts which are in the process of being counted. (There
may be multisets which can be counted reasonably quickly by
this implementation, but which would overflow the default
Python recursion limit with a recursive implementation.)
2) Instead of using the part data structure directly, a more
compact key is constructed. This saves space, but more
importantly coalesces some parts which would remain
separate with physical keys.
Unlike the enumeration functions, there is currently no _range
version of count_partitions. If someone wants to stretch
their brain, it should be possible to construct one by
memoizing with a histogram of counts rather than a single
count, and combining the histograms.
"""
# number of partitions so far in the enumeration
self.pcount = 0
# dp_stack is list of lists of (part_key, start_count) pairs
self.dp_stack = []
# dp_map is map part_key-> count, where count represents the
# number of multiset which are descendants of a part with this
# key, **or any of its decrements**
# Thus, when we find a part in the map, we add its count
# value to the running total, cut off the enumeration, and
# backtrack
if not hasattr(self, 'dp_map'):
self.dp_map = {}
self._initialize_enumeration(multiplicities)
pkey = part_key(self.top_part())
self.dp_stack.append([(pkey, 0), ])
while True:
while self.spread_part_multiplicity():
pkey = part_key(self.top_part())
if pkey in self.dp_map:
# Already have a cached value for the count of the
# subtree rooted at this part. Add it to the
# running counter, and break out of the spread
# loop. The -1 below is to compensate for the
# leaf that this code path would otherwise find,
# and which gets incremented for below.
self.pcount += (self.dp_map[pkey] - 1)
self.lpart -= 1
break
else:
self.dp_stack.append([(pkey, self.pcount), ])
# M4 count a leaf partition
self.pcount += 1
# M5 (Decrease v)
while not self.decrement_part(self.top_part()):
# M6 (Backtrack)
for key, oldcount in self.dp_stack.pop():
self.dp_map[key] = self.pcount - oldcount
if self.lpart == 0:
return self.pcount
self.lpart -= 1
# At this point have successfully decremented the part on
# the stack and it does not appear in the cache. It needs
# to be added to the list at the top of dp_stack
pkey = part_key(self.top_part())
self.dp_stack[-1].append((pkey, self.pcount),)
def part_key(part):
"""Helper for MultisetPartitionTraverser.count_partitions that
creates a key for ``part``, that only includes information which can
affect the count for that part. (Any irrelevant information just
reduces the effectiveness of dynamic programming.)
Notes
=====
This member function is a candidate for future exploration. There
are likely symmetries that can be exploited to coalesce some
``part_key`` values, and thereby save space and improve
performance.
"""
# The component number is irrelevant for counting partitions, so
# leave it out of the memo key.
rval = []
for ps in part:
rval.append(ps.u)
rval.append(ps.v)
return tuple(rval)
```