ODE¶
User Functions¶
These are functions that are imported into the global namespace with from
sympy import *
. These functions (unlike Hint Functions, below) are
intended for use by ordinary users of SymPy.
dsolve()
¶

sympy.solvers.ode.
dsolve
(eq, func=None, hint='default', simplify=True, ics=None, xi=None, eta=None, x0=0, n=6, **kwargs)[source]¶  Solves any (supported) kind of ordinary differential equation and system of ordinary differential equations.
Examples
>>> from sympy import Function, dsolve, Eq, Derivative, sin, cos, symbols >>> from sympy.abc import x >>> f = Function('f') >>> dsolve(Derivative(f(x), x, x) + 9*f(x), f(x)) Eq(f(x), C1*sin(3*x) + C2*cos(3*x))
>>> eq = sin(x)*cos(f(x)) + cos(x)*sin(f(x))*f(x).diff(x) >>> dsolve(eq, hint='1st_exact') [Eq(f(x), acos(C1/cos(x)) + 2*pi), Eq(f(x), acos(C1/cos(x)))] >>> dsolve(eq, hint='almost_linear') [Eq(f(x), acos(C1/sqrt(cos(x)**2)) + 2*pi), Eq(f(x), acos(C1/sqrt(cos(x)**2)))] >>> t = symbols('t') >>> x, y = symbols('x, y', function=True) >>> eq = (Eq(Derivative(x(t),t), 12*t*x(t) + 8*y(t)), Eq(Derivative(y(t),t), 21*x(t) + 7*t*y(t))) >>> dsolve(eq) [Eq(x(t), C1*x0 + C2*x0*Integral(8*exp(Integral(7*t, t))*exp(Integral(12*t, t))/x0**2, t)), Eq(y(t), C1*y0 + C2(y0*Integral(8*exp(Integral(7*t, t))*exp(Integral(12*t, t))/x0**2, t) + exp(Integral(7*t, t))*exp(Integral(12*t, t))/x0))] >>> eq = (Eq(Derivative(x(t),t),x(t)*y(t)*sin(t)), Eq(Derivative(y(t),t),y(t)**2*sin(t))) >>> dsolve(eq) {Eq(x(t), exp(C1)/(C2*exp(C1)  cos(t))), Eq(y(t), 1/(C1  cos(t)))}
For Single Ordinary Differential Equation
It is classified under this when number of equation in
eq
is one. Usagedsolve(eq, f(x), hint)
> Solve ordinary differential equationeq
for functionf(x)
, using methodhint
.Details
eq
can be any supported ordinary differential equation (see theode
docstring for supported methods). This can either be anEquality
, or an expression, which is assumed to be equal to0
.f(x)
is a function of one variable whose derivatives in that variable make up the ordinary differential equation
eq
. In many cases it is not necessary to provide this; it will be autodetected (and an error raised if it couldn’t be detected). hint
is the solving method that you want dsolve to use. Useclassify_ode(eq, f(x))
to get all of the possible hints for an ODE. The default hint,default
, will use whatever hint is returned first byclassify_ode()
. See Hints below for more options that you can use for hint.simplify
enables simplification byodesimp()
. See its docstring for more information. Turn this off, for example, to disable solving of solutions forfunc
or simplification of arbitrary constants. It will still integrate with this hint. Note that the solution may contain more arbitrary constants than the order of the ODE with this option enabled.xi
andeta
are the infinitesimal functions of an ordinary differential equation. They are the infinitesimals of the Lie group
of point transformations for which the differential equation is
invariant. The user can specify values for the infinitesimals. If
nothing is specified,
xi
andeta
are calculated usinginfinitesimals()
with the help of various heuristics. ics
is the set of boundary conditions for the differential equation. It should be given in the form of
{f(x0): x1, f(x).diff(x).subs(x, x2): x3}
and so on. For now initial conditions are implemented only for power series solutions of firstorder differential equations which should be given in the form of{f(x0): x1}
(See issue 4720). If nothing is specified for this casef(0)
is assumed to beC0
and the power series solution is calculated about 0. x0
is the point about which the power series solution of a differential equation is to be evaluated.
n
gives the exponent of the dependent variable up to which the power series solution of a differential equation is to be evaluated.
Hints
Aside from the various solving methods, there are also some metahints that you can pass to
dsolve()
:default
: This uses whatever hint is returned first by
classify_ode()
. This is the default argument todsolve()
. all
:To make
dsolve()
apply all relevant classification hints, usedsolve(ODE, func, hint="all")
. This will return a dictionary ofhint:solution
terms. If a hint causes dsolve to raise theNotImplementedError
, value of that hint’s key will be the exception object raised. The dictionary will also include some special keys:order
: The order of the ODE. See alsoode_order()
indeutils.py
.best
: The simplest hint; what would be returned bybest
below.best_hint
: The hint that would produce the solution given bybest
. If more than one hint produces the best solution, the first one in the tuple returned byclassify_ode()
is chosen.default
: The solution that would be returned by default. This is the one produced by the hint that appears first in the tuple returned byclassify_ode()
.
all_Integral
: This is the same as
all
, except if a hint also has a corresponding_Integral
hint, it only returns the_Integral
hint. This is useful ifall
causesdsolve()
to hang because of a difficult or impossible integral. This metahint will also be much faster thanall
, becauseintegrate()
is an expensive routine. best
: To have
dsolve()
try all methods and return the simplest one. This takes into account whether the solution is solvable in the function, whether it contains any Integral classes (i.e. unevaluatable integrals), and which one is the shortest in size.
See also the
classify_ode()
docstring for more info on hints, and theode
docstring for a list of all supported hints.Tips
You can declare the derivative of an unknown function this way:
>>> from sympy import Function, Derivative >>> from sympy.abc import x # x is the independent variable >>> f = Function("f")(x) # f is a function of x >>> # f_ will be the derivative of f with respect to x >>> f_ = Derivative(f, x)
See
test_ode.py
for many tests, which serves also as a set of examples for how to usedsolve()
.dsolve()
always returns anEquality
class (except for the case when the hint isall
orall_Integral
). If possible, it solves the solution explicitly for the function being solved for. Otherwise, it returns an implicit solution.Arbitrary constants are symbols named
C1
,C2
, and so on.Because all solutions should be mathematically equivalent, some hints may return the exact same result for an ODE. Often, though, two different hints will return the same solution formatted differently. The two should be equivalent. Also note that sometimes the values of the arbitrary constants in two different solutions may not be the same, because one constant may have “absorbed” other constants into it.
Do
help(ode.ode_<hintname>)
to get help more information on a specific hint, where<hintname>
is the name of a hint without_Integral
.
For System Of Ordinary Differential Equations
 Usage
dsolve(eq, func)
> Solve a system of ordinary differential equationseq
forfunc
being list of functions including \(x(t)\), \(y(t)\), \(z(t)\) where number of functions in the list depends upon the number of equations provided ineq
.Details
eq
can be any supported system of ordinary differential equations This can either be anEquality
, or an expression, which is assumed to be equal to0
.func
holdsx(t)
andy(t)
being functions of one variable which together with some of their derivatives make up the system of ordinary differential equationeq
. It is not necessary to provide this; it will be autodetected (and an error raised if it couldn’t be detected).Hints
The hints are formed by parameters returned by classify_sysode, combining them give hints name used later for forming method name.
classify_ode()
¶

sympy.solvers.ode.
classify_ode
(eq, func=None, dict=False, ics=None, **kwargs)[source]¶ Returns a tuple of possible
dsolve()
classifications for an ODE.The tuple is ordered so that first item is the classification that
dsolve()
uses to solve the ODE by default. In general, classifications at the near the beginning of the list will produce better solutions faster than those near the end, thought there are always exceptions. To makedsolve()
use a different classification, usedsolve(ODE, func, hint=<classification>)
. See also thedsolve()
docstring for different metahints you can use.If
dict
is true,classify_ode()
will return a dictionary ofhint:match
expression terms. This is intended for internal use bydsolve()
. Note that because dictionaries are ordered arbitrarily, this will most likely not be in the same order as the tuple.You can get help on different hints by executing
help(ode.ode_hintname)
, wherehintname
is the name of the hint without_Integral
.See
allhints
or theode
docstring for a list of all supported hints that can be returned fromclassify_ode()
.Notes
These are remarks on hint names.
_Integral
If a classification has
_Integral
at the end, it will return the expression with an unevaluatedIntegral
class in it. Note that a hint may do this anyway ifintegrate()
cannot do the integral, though just using an_Integral
will do so much faster. Indeed, an_Integral
hint will always be faster than its corresponding hint without_Integral
becauseintegrate()
is an expensive routine. Ifdsolve()
hangs, it is probably becauseintegrate()
is hanging on a tough or impossible integral. Try using an_Integral
hint orall_Integral
to get it return something.Note that some hints do not have
_Integral
counterparts. This is becauseintegrate()
is not used in solving the ODE for those method. For example, \(n\)th order linear homogeneous ODEs with constant coefficients do not require integration to solve, so there is nonth_linear_homogeneous_constant_coeff_Integrate
hint. You can easily evaluate any unevaluatedIntegral
s in an expression by doingexpr.doit()
.Ordinals
Some hints contain an ordinal such as1st_linear
. This is to help differentiate them from other hints, as well as from other methods that may not be implemented yet. If a hint hasnth
in it, such as thenth_linear
hints, this means that the method used to applies to ODEs of any order.indep
anddep
Some hints contain the wordsindep
ordep
. These reference the independent variable and the dependent function, respectively. For example, if an ODE is in terms of \(f(x)\), thenindep
will refer to \(x\) anddep
will refer to \(f\).subs
If a hints has the wordsubs
in it, it means the the ODE is solved by substituting the expression given after the wordsubs
for a single dummy variable. This is usually in terms ofindep
anddep
as above. The substituted expression will be written only in characters allowed for names of Python objects, meaning operators will be spelled out. For example,indep
/dep
will be written asindep_div_dep
.coeff
The wordcoeff
in a hint refers to the coefficients of something in the ODE, usually of the derivative terms. See the docstring for the individual methods for more info (help(ode)
). This is contrast tocoefficients
, as inundetermined_coefficients
, which refers to the common name of a method._best
Methods that have more than one fundamental way to solve will have a hint for each submethod and a_best
metaclassification. This will evaluate all hints and return the best, using the same considerations as the normalbest
metahint.Examples
>>> from sympy import Function, classify_ode, Eq >>> from sympy.abc import x >>> f = Function('f') >>> classify_ode(Eq(f(x).diff(x), 0), f(x)) ('separable', '1st_linear', '1st_homogeneous_coeff_best', '1st_homogeneous_coeff_subs_indep_div_dep', '1st_homogeneous_coeff_subs_dep_div_indep', '1st_power_series', 'lie_group', 'nth_linear_constant_coeff_homogeneous', 'separable_Integral', '1st_linear_Integral', '1st_homogeneous_coeff_subs_indep_div_dep_Integral', '1st_homogeneous_coeff_subs_dep_div_indep_Integral') >>> classify_ode(f(x).diff(x, 2) + 3*f(x).diff(x) + 2*f(x)  4) ('nth_linear_constant_coeff_undetermined_coefficients', 'nth_linear_constant_coeff_variation_of_parameters', 'nth_linear_constant_coeff_variation_of_parameters_Integral')
checkodesol()
¶

sympy.solvers.ode.
checkodesol
(ode, sol, func=None, order='auto', solve_for_func=True)[source]¶ Substitutes
sol
intoode
and checks that the result is0
.This only works when
func
is one function, like \(f(x)\).sol
can be a single solution or a list of solutions. Each solution may be anEquality
that the solution satisfies, e.g.Eq(f(x), C1), Eq(f(x) + C1, 0)
; or simply anExpr
, e.g.f(x)  C1
. In most cases it will not be necessary to explicitly identify the function, but if the function cannot be inferred from the original equation it can be supplied through thefunc
argument.If a sequence of solutions is passed, the same sort of container will be used to return the result for each solution.
It tries the following methods, in order, until it finds zero equivalence:
 Substitute the solution for \(f\) in the original equation. This only
works if
ode
is solved for \(f\). It will attempt to solve it first unlesssolve_for_func == False
.  Take \(n\) derivatives of the solution, where \(n\) is the order of
ode
, and check to see if that is equal to the solution. This only works on exact ODEs.  Take the 1st, 2nd, ..., \(n\)th derivatives of the solution, each time
solving for the derivative of \(f\) of that order (this will always be
possible because \(f\) is a linear operator). Then back substitute each
derivative into
ode
in reverse order.
This function returns a tuple. The first item in the tuple is
True
if the substitution results in0
, andFalse
otherwise. The second item in the tuple is what the substitution results in. It should always be0
if the first item isTrue
. Note that sometimes this function willFalse
, but with an expression that is identically equal to0
, instead of returningTrue
. This is becausesimplify()
cannot reduce the expression to0
. If an expression returned by this function vanishes identically, thensol
really is a solution toode
.If this function seems to hang, it is probably because of a hard simplification.
To use this function to test, test the first item of the tuple.
Examples
>>> from sympy import Eq, Function, checkodesol, symbols >>> x, C1 = symbols('x,C1') >>> f = Function('f') >>> checkodesol(f(x).diff(x), Eq(f(x), C1)) (True, 0) >>> assert checkodesol(f(x).diff(x), C1)[0] >>> assert not checkodesol(f(x).diff(x), x)[0] >>> checkodesol(f(x).diff(x, 2), x**2) (False, 2)
 Substitute the solution for \(f\) in the original equation. This only
works if
homogeneous_order()
¶

sympy.solvers.ode.
homogeneous_order
(eq, *symbols)[source]¶ Returns the order \(n\) if \(g\) is homogeneous and
None
if it is not homogeneous.Determines if a function is homogeneous and if so of what order. A function \(f(x, y, \cdots)\) is homogeneous of order \(n\) if \(f(t x, t y, \cdots) = t^n f(x, y, \cdots)\).
If the function is of two variables, \(F(x, y)\), then \(f\) being homogeneous of any order is equivalent to being able to rewrite \(F(x, y)\) as \(G(x/y)\) or \(H(y/x)\). This fact is used to solve 1st order ordinary differential equations whose coefficients are homogeneous of the same order (see the docstrings of
ode_1st_homogeneous_coeff_subs_dep_div_indep()
andode_1st_homogeneous_coeff_subs_indep_div_dep()
).Symbols can be functions, but every argument of the function must be a symbol, and the arguments of the function that appear in the expression must match those given in the list of symbols. If a declared function appears with different arguments than given in the list of symbols,
None
is returned.Examples
>>> from sympy import Function, homogeneous_order, sqrt >>> from sympy.abc import x, y >>> f = Function('f') >>> homogeneous_order(f(x), f(x)) is None True >>> homogeneous_order(f(x,y), f(y, x), x, y) is None True >>> homogeneous_order(f(x), f(x), x) 1 >>> homogeneous_order(x**2*f(x)/sqrt(x**2+f(x)**2), x, f(x)) 2 >>> homogeneous_order(x**2+f(x), x, f(x)) is None True
infinitesimals()
¶

sympy.solvers.ode.
infinitesimals
(eq, func=None, order=None, hint='default', match=None)[source]¶ The infinitesimal functions of an ordinary differential equation, \(\xi(x,y)\) and \(\eta(x,y)\), are the infinitesimals of the Lie group of point transformations for which the differential equation is invariant. So, the ODE \(y'=f(x,y)\) would admit a Lie group \(x^*=X(x,y;\varepsilon)=x+\varepsilon\xi(x,y)\), \(y^*=Y(x,y;\varepsilon)=y+\varepsilon\eta(x,y)\) such that \((y^*)'=f(x^*, y^*)\). A change of coordinates, to \(r(x,y)\) and \(s(x,y)\), can be performed so this Lie group becomes the translation group, \(r^*=r\) and \(s^*=s+\varepsilon\). They are tangents to the coordinate curves of the new system.
Consider the transformation \((x, y) \to (X, Y)\) such that the differential equation remains invariant. \(\xi\) and \(\eta\) are the tangents to the transformed coordinates \(X\) and \(Y\), at \(\varepsilon=0\).
\[\left(\frac{\partial X(x,y;\varepsilon)}{\partial\varepsilon }\right)_{\varepsilon=0} = \xi, \left(\frac{\partial Y(x,y;\varepsilon)}{\partial\varepsilon }\right)_{\varepsilon=0} = \eta,\]The infinitesimals can be found by solving the following PDE:
>>> from sympy import Function, diff, Eq, pprint >>> from sympy.abc import x, y >>> xi, eta, h = map(Function, ['xi', 'eta', 'h']) >>> h = h(x, y) # dy/dx = h >>> eta = eta(x, y) >>> xi = xi(x, y) >>> genform = Eq(eta.diff(x) + (eta.diff(y)  xi.diff(x))*h ...  (xi.diff(y))*h**2  xi*(h.diff(x))  eta*(h.diff(y)), 0) >>> pprint(genform) /d d \ d 2 d (eta(x, y))  (xi(x, y))*h(x, y)  eta(x, y)*(h(x, y))  h (x, y)*(x \dy dx / dy dy d d i(x, y))  xi(x, y)*(h(x, y)) + (eta(x, y)) = 0 dx dx
Solving the above mentioned PDE is not trivial, and can be solved only by making intelligent assumptions for \(\xi\) and \(\eta\) (heuristics). Once an infinitesimal is found, the attempt to find more heuristics stops. This is done to optimise the speed of solving the differential equation. If a list of all the infinitesimals is needed,
hint
should be flagged asall
, which gives the complete list of infinitesimals. If the infinitesimals for a particular heuristic needs to be found, it can be passed as a flag tohint
.References
 Solving differential equations by Symmetry Groups, John Starrett, pp. 1  pp. 14
Examples
>>> from sympy import Function, diff >>> from sympy.solvers.ode import infinitesimals >>> from sympy.abc import x >>> f = Function('f') >>> eq = f(x).diff(x)  x**2*f(x) >>> infinitesimals(eq) [{eta(x, f(x)): exp(x**3/3), xi(x, f(x)): 0}]
checkinfsol()
¶

sympy.solvers.ode.
checkinfsol
(eq, infinitesimals, func=None, order=None)[source]¶ This function is used to check if the given infinitesimals are the actual infinitesimals of the given first order differential equation. This method is specific to the Lie Group Solver of ODEs.
As of now, it simply checks, by substituting the infinitesimals in the partial differential equation.
\[\frac{\partial \eta}{\partial x} + \left(\frac{\partial \eta}{\partial y}  \frac{\partial \xi}{\partial x}\right)*h  \frac{\partial \xi}{\partial y}*h^{2}  \xi\frac{\partial h}{\partial x}  \eta\frac{\partial h}{\partial y} = 0\]where \(\eta\), and \(\xi\) are the infinitesimals and \(h(x,y) = \frac{dy}{dx}\)
The infinitesimals should be given in the form of a list of dicts
[{xi(x, y): inf, eta(x, y): inf}]
, corresponding to the output of the function infinitesimals. It returns a list of values of the form[(True/False, sol)]
wheresol
is the value obtained after substituting the infinitesimals in the PDE. If it isTrue
, thensol
would be 0.
Hint Functions¶
These functions are intended for internal use by
dsolve()
and others. Unlike User Functions,
above, these are not intended for everyday use by ordinary SymPy users.
Instead, functions such as dsolve()
should be used.
Nonetheless, these functions contain useful information in their docstrings on
the various ODE solving methods. For this reason, they are documented here.
allhints
¶

sympy.solvers.ode.
allhints
= ('separable', '1st_exact', '1st_linear', 'Bernoulli', 'Riccati_special_minus2', '1st_homogeneous_coeff_best', '1st_homogeneous_coeff_subs_indep_div_dep', '1st_homogeneous_coeff_subs_dep_div_indep', 'almost_linear', 'linear_coefficients', 'separable_reduced', '1st_power_series', 'lie_group', 'nth_linear_constant_coeff_homogeneous', 'nth_linear_euler_eq_homogeneous', 'nth_linear_constant_coeff_undetermined_coefficients', 'nth_linear_euler_eq_nonhomogeneous_undetermined_coefficients', 'nth_linear_constant_coeff_variation_of_parameters', 'nth_linear_euler_eq_nonhomogeneous_variation_of_parameters', 'Liouville', '2nd_power_series_ordinary', '2nd_power_series_regular', 'separable_Integral', '1st_exact_Integral', '1st_linear_Integral', 'Bernoulli_Integral', '1st_homogeneous_coeff_subs_indep_div_dep_Integral', '1st_homogeneous_coeff_subs_dep_div_indep_Integral', 'almost_linear_Integral', 'linear_coefficients_Integral', 'separable_reduced_Integral', 'nth_linear_constant_coeff_variation_of_parameters_Integral', 'nth_linear_euler_eq_nonhomogeneous_variation_of_parameters_Integral', 'Liouville_Integral')¶ This is a list of hints in the order that they should be preferred by
classify_ode()
. In general, hints earlier in the list should produce simpler solutions than those later in the list (for ODEs that fit both). For now, the order of this list is based on empirical observations by the developers of SymPy.The hint used by
dsolve()
for a specific ODE can be overridden (see the docstring).In general,
_Integral
hints are grouped at the end of the list, unless there is a method that returns an unevaluable integral most of the time (which go near the end of the list anyway).default
,all
,best
, andall_Integral
metahints should not be included in this list, but_best
and_Integral
hints should be included.
odesimp
¶

sympy.solvers.ode.
odesimp
(eq, func, order, constants, hint)[source]¶ Simplifies ODEs, including trying to solve for
func
and runningconstantsimp()
.It may use knowledge of the type of solution that the hint returns to apply additional simplifications.
It also attempts to integrate any
Integral
s in the expression, if the hint is not an_Integral
hint.This function should have no effect on expressions returned by
dsolve()
, asdsolve()
already callsodesimp()
, but the individual hint functions do not callodesimp()
(because thedsolve()
wrapper does). Therefore, this function is designed for mainly internal use.Examples
>>> from sympy import sin, symbols, dsolve, pprint, Function >>> from sympy.solvers.ode import odesimp >>> x , u2, C1= symbols('x,u2,C1') >>> f = Function('f')
>>> eq = dsolve(x*f(x).diff(x)  f(x)  x*sin(f(x)/x), f(x), ... hint='1st_homogeneous_coeff_subs_indep_div_dep_Integral', ... simplify=False) >>> pprint(eq, wrap_line=False) x  f(x) /   / 1 \  u2 +    /1 \   sin  \ \u2// log(f(x)) = log(C1) +   d(u2)  2  u2  /
>>> pprint(odesimp(eq, f(x), 1, {C1}, ... hint='1st_homogeneous_coeff_subs_indep_div_dep' ... )) x  = C1 /f(x)\ tan \2*x /
constant_renumber
¶

sympy.solvers.ode.
constant_renumber
(expr, symbolname, startnumber, endnumber)[source]¶ Renumber arbitrary constants in
expr
to have numbers 1 through \(N\) where \(N\) isendnumber  startnumber + 1
at most. In the process, this reorders expression terms in a standard way.This is a simple function that goes through and renumbers any
Symbol
with a name in the formsymbolname + num
wherenum
is in the range fromstartnumber
toendnumber
.Symbols are renumbered based on
.sort_key()
, so they should be numbered roughly in the order that they appear in the final, printed expression. Note that this ordering is based in part on hashes, so it can produce different results on different machines.The structure of this function is very similar to that of
constantsimp()
.Examples
>>> from sympy import symbols, Eq, pprint >>> from sympy.solvers.ode import constant_renumber >>> x, C0, C1, C2, C3, C4 = symbols('x,C:5')
Only constants in the given range (inclusive) are renumbered; the renumbering always starts from 1:
>>> constant_renumber(C1 + C3 + C4, 'C', 1, 3) C1 + C2 + C4 >>> constant_renumber(C0 + C1 + C3 + C4, 'C', 2, 4) C0 + 2*C1 + C2 >>> constant_renumber(C0 + 2*C1 + C2, 'C', 0, 1) C1 + 3*C2 >>> pprint(C2 + C1*x + C3*x**2) 2 C1*x + C2 + C3*x >>> pprint(constant_renumber(C2 + C1*x + C3*x**2, 'C', 1, 3)) 2 C1 + C2*x + C3*x
constantsimp
¶

sympy.solvers.ode.
constantsimp
(expr, constants)[source]¶ Simplifies an expression with arbitrary constants in it.
This function is written specifically to work with
dsolve()
, and is not intended for general use.Simplification is done by “absorbing” the arbitrary constants into other arbitrary constants, numbers, and symbols that they are not independent of.
The symbols must all have the same name with numbers after it, for example,
C1
,C2
,C3
. Thesymbolname
here would be ‘C
‘, thestartnumber
would be 1, and theendnumber
would be 3. If the arbitrary constants are independent of the variablex
, then the independent symbol would bex
. There is no need to specify the dependent function, such asf(x)
, because it already has the independent symbol,x
, in it.Because terms are “absorbed” into arbitrary constants and because constants are renumbered after simplifying, the arbitrary constants in expr are not necessarily equal to the ones of the same name in the returned result.
If two or more arbitrary constants are added, multiplied, or raised to the power of each other, they are first absorbed together into a single arbitrary constant. Then the new constant is combined into other terms if necessary.
Absorption of constants is done with limited assistance:
 terms of
Add
s are collected to try join constants so \(e^x (C_1 \cos(x) + C_2 \cos(x))\) will simplify to \(e^x C_1 \cos(x)\);  powers with exponents that are
Add
s are expanded so \(e^{C_1 + x}\) will be simplified to \(C_1 e^x\).
Use
constant_renumber()
to renumber constants after simplification or else arbitrary numbers on constants may appear, e.g. \(C_1 + C_3 x\).In rare cases, a single constant can be “simplified” into two constants. Every differential equation solution should have as many arbitrary constants as the order of the differential equation. The result here will be technically correct, but it may, for example, have \(C_1\) and \(C_2\) in an expression, when \(C_1\) is actually equal to \(C_2\). Use your discretion in such situations, and also take advantage of the ability to use hints in
dsolve()
.Examples
>>> from sympy import symbols >>> from sympy.solvers.ode import constantsimp >>> C1, C2, C3, x, y = symbols('C1, C2, C3, x, y') >>> constantsimp(2*C1*x, {C1, C2, C3}) C1*x >>> constantsimp(C1 + 2 + x, {C1, C2, C3}) C1 + x >>> constantsimp(C1*C2 + 2 + C2 + C3*x, {C1, C2, C3}) C1 + C3*x
 terms of
sol_simplicity
¶

sympy.solvers.ode.
ode_sol_simplicity
(sol, func, trysolving=True)[source]¶ Returns an extended integer representing how simple a solution to an ODE is.
The following things are considered, in order from most simple to least:
sol
is solved forfunc
.sol
is not solved forfunc
, but can be if passed to solve (e.g., a solution returned bydsolve(ode, func, simplify=False
). If
sol
is not solved forfunc
, then base the result on the length ofsol
, as computed bylen(str(sol))
.  If
sol
has any unevaluatedIntegral
s, this will automatically be considered less simple than any of the above.
This function returns an integer such that if solution A is simpler than solution B by above metric, then
ode_sol_simplicity(sola, func) < ode_sol_simplicity(solb, func)
.Currently, the following are the numbers returned, but if the heuristic is ever improved, this may change. Only the ordering is guaranteed.
Simplicity Return sol
solved forfunc
2
sol
not solved forfunc
but can be1
sol
is not solved nor solvable forfunc
len(str(sol))
sol
contains anIntegral
oo
oo
here means the SymPy infinity, which should compare greater than any integer.If you already know
solve()
cannot solvesol
, you can usetrysolving=False
to skip that step, which is the only potentially slow step. For example,dsolve()
with thesimplify=False
flag should do this.If
sol
is a list of solutions, if the worst solution in the list returnsoo
it returns that, otherwise it returnslen(str(sol))
, that is, the length of the string representation of the whole list.Examples
This function is designed to be passed to
min
as the key argument, such asmin(listofsolutions, key=lambda i: ode_sol_simplicity(i, f(x)))
.>>> from sympy import symbols, Function, Eq, tan, cos, sqrt, Integral >>> from sympy.solvers.ode import ode_sol_simplicity >>> x, C1, C2 = symbols('x, C1, C2') >>> f = Function('f')
>>> ode_sol_simplicity(Eq(f(x), C1*x**2), f(x)) 2 >>> ode_sol_simplicity(Eq(x**2 + f(x), C1), f(x)) 1 >>> ode_sol_simplicity(Eq(f(x), C1*Integral(2*x, x)), f(x)) oo >>> eq1 = Eq(f(x)/tan(f(x)/(2*x)), C1) >>> eq2 = Eq(f(x)/tan(f(x)/(2*x) + f(x)), C2) >>> [ode_sol_simplicity(eq, f(x)) for eq in [eq1, eq2]] [28, 35] >>> min([eq1, eq2], key=lambda i: ode_sol_simplicity(i, f(x))) Eq(f(x)/tan(f(x)/(2*x)), C1)
1st_exact
¶

sympy.solvers.ode.
ode_1st_exact
(eq, func, order, match)[source]¶ Solves 1st order exact ordinary differential equations.
A 1st order differential equation is called exact if it is the total differential of a function. That is, the differential equation
\[P(x, y) \,\partial{}x + Q(x, y) \,\partial{}y = 0\]is exact if there is some function \(F(x, y)\) such that \(P(x, y) = \partial{}F/\partial{}x\) and \(Q(x, y) = \partial{}F/\partial{}y\). It can be shown that a necessary and sufficient condition for a first order ODE to be exact is that \(\partial{}P/\partial{}y = \partial{}Q/\partial{}x\). Then, the solution will be as given below:
>>> from sympy import Function, Eq, Integral, symbols, pprint >>> x, y, t, x0, y0, C1= symbols('x,y,t,x0,y0,C1') >>> P, Q, F= map(Function, ['P', 'Q', 'F']) >>> pprint(Eq(Eq(F(x, y), Integral(P(t, y), (t, x0, x)) + ... Integral(Q(x0, t), (t, y0, y))), C1)) x y / /   F(x, y) =  P(t, y) dt +  Q(x0, t) dt = C1   / / x0 y0
Where the first partials of \(P\) and \(Q\) exist and are continuous in a simply connected region.
A note: SymPy currently has no way to represent inert substitution on an expression, so the hint
1st_exact_Integral
will return an integral with \(dy\). This is supposed to represent the function that you are solving for.References
 http://en.wikipedia.org/wiki/Exact_differential_equation
 M. Tenenbaum & H. Pollard, “Ordinary Differential Equations”, Dover 1963, pp. 73
# indirect doctest
Examples
>>> from sympy import Function, dsolve, cos, sin >>> from sympy.abc import x >>> f = Function('f') >>> dsolve(cos(f(x))  (x*sin(f(x))  f(x)**2)*f(x).diff(x), ... f(x), hint='1st_exact') Eq(x*cos(f(x)) + f(x)**3/3, C1)
1st_homogeneous_coeff_best
¶

sympy.solvers.ode.
ode_1st_homogeneous_coeff_best
(eq, func, order, match)[source]¶ Returns the best solution to an ODE from the two hints
1st_homogeneous_coeff_subs_dep_div_indep
and1st_homogeneous_coeff_subs_indep_div_dep
.This is as determined by
ode_sol_simplicity()
.See the
ode_1st_homogeneous_coeff_subs_indep_div_dep()
andode_1st_homogeneous_coeff_subs_dep_div_indep()
docstrings for more information on these hints. Note that there is noode_1st_homogeneous_coeff_best_Integral
hint.References
 http://en.wikipedia.org/wiki/Homogeneous_differential_equation
 M. Tenenbaum & H. Pollard, “Ordinary Differential Equations”, Dover 1963, pp. 59
# indirect doctest
Examples
>>> from sympy import Function, dsolve, pprint >>> from sympy.abc import x >>> f = Function('f') >>> pprint(dsolve(2*x*f(x) + (x**2 + f(x)**2)*f(x).diff(x), f(x), ... hint='1st_homogeneous_coeff_best', simplify=False)) / 2 \  3*x  log + 1  2  \f (x) / log(f(x)) = log(C1)   3
1st_homogeneous_coeff_subs_dep_div_indep
¶

sympy.solvers.ode.
ode_1st_homogeneous_coeff_subs_dep_div_indep
(eq, func, order, match)[source]¶ Solves a 1st order differential equation with homogeneous coefficients using the substitution \(u_1 = \frac{\text{<dependent variable>}}{\text{<independent variable>}}\).
This is a differential equation
\[P(x, y) + Q(x, y) dy/dx = 0\]such that \(P\) and \(Q\) are homogeneous and of the same order. A function \(F(x, y)\) is homogeneous of order \(n\) if \(F(x t, y t) = t^n F(x, y)\). Equivalently, \(F(x, y)\) can be rewritten as \(G(y/x)\) or \(H(x/y)\). See also the docstring of
homogeneous_order()
.If the coefficients \(P\) and \(Q\) in the differential equation above are homogeneous functions of the same order, then it can be shown that the substitution \(y = u_1 x\) (i.e. \(u_1 = y/x\)) will turn the differential equation into an equation separable in the variables \(x\) and \(u\). If \(h(u_1)\) is the function that results from making the substitution \(u_1 = f(x)/x\) on \(P(x, f(x))\) and \(g(u_2)\) is the function that results from the substitution on \(Q(x, f(x))\) in the differential equation \(P(x, f(x)) + Q(x, f(x)) f'(x) = 0\), then the general solution is:
>>> from sympy import Function, dsolve, pprint >>> from sympy.abc import x >>> f, g, h = map(Function, ['f', 'g', 'h']) >>> genform = g(f(x)/x) + h(f(x)/x)*f(x).diff(x) >>> pprint(genform) /f(x)\ /f(x)\ d g + h*(f(x)) \ x / \ x / dx >>> pprint(dsolve(genform, f(x), ... hint='1st_homogeneous_coeff_subs_dep_div_indep_Integral')) f(x)  x /   h(u1) log(x) = C1 +   d(u1)  u1*h(u1) + g(u1)  /
Where \(u_1 h(u_1) + g(u_1) \ne 0\) and \(x \ne 0\).
See also the docstrings of
ode_1st_homogeneous_coeff_best()
andode_1st_homogeneous_coeff_subs_indep_div_dep()
.References
 http://en.wikipedia.org/wiki/Homogeneous_differential_equation
 M. Tenenbaum & H. Pollard, “Ordinary Differential Equations”, Dover 1963, pp. 59
# indirect doctest
Examples
>>> from sympy import Function, dsolve >>> from sympy.abc import x >>> f = Function('f') >>> pprint(dsolve(2*x*f(x) + (x**2 + f(x)**2)*f(x).diff(x), f(x), ... hint='1st_homogeneous_coeff_subs_dep_div_indep', simplify=False)) / 3 \ 3*f(x) f (x) log +   x 3  \ x / log(x) = log(C1)   3
1st_homogeneous_coeff_subs_indep_div_dep
¶

sympy.solvers.ode.
ode_1st_homogeneous_coeff_subs_indep_div_dep
(eq, func, order, match)[source]¶ Solves a 1st order differential equation with homogeneous coefficients using the substitution \(u_2 = \frac{\text{<independent variable>}}{\text{<dependent variable>}}\).
This is a differential equation
\[P(x, y) + Q(x, y) dy/dx = 0\]such that \(P\) and \(Q\) are homogeneous and of the same order. A function \(F(x, y)\) is homogeneous of order \(n\) if \(F(x t, y t) = t^n F(x, y)\). Equivalently, \(F(x, y)\) can be rewritten as \(G(y/x)\) or \(H(x/y)\). See also the docstring of
homogeneous_order()
.If the coefficients \(P\) and \(Q\) in the differential equation above are homogeneous functions of the same order, then it can be shown that the substitution \(x = u_2 y\) (i.e. \(u_2 = x/y\)) will turn the differential equation into an equation separable in the variables \(y\) and \(u_2\). If \(h(u_2)\) is the function that results from making the substitution \(u_2 = x/f(x)\) on \(P(x, f(x))\) and \(g(u_2)\) is the function that results from the substitution on \(Q(x, f(x))\) in the differential equation \(P(x, f(x)) + Q(x, f(x)) f'(x) = 0\), then the general solution is:
>>> from sympy import Function, dsolve, pprint >>> from sympy.abc import x >>> f, g, h = map(Function, ['f', 'g', 'h']) >>> genform = g(x/f(x)) + h(x/f(x))*f(x).diff(x) >>> pprint(genform) / x \ / x \ d g + h*(f(x)) \f(x)/ \f(x)/ dx >>> pprint(dsolve(genform, f(x), ... hint='1st_homogeneous_coeff_subs_indep_div_dep_Integral')) x  f(x) /   g(u2)   d(u2)  u2*g(u2) + h(u2)  / f(x) = C1*e
Where \(u_2 g(u_2) + h(u_2) \ne 0\) and \(f(x) \ne 0\).
See also the docstrings of
ode_1st_homogeneous_coeff_best()
andode_1st_homogeneous_coeff_subs_dep_div_indep()
.References
 http://en.wikipedia.org/wiki/Homogeneous_differential_equation
 M. Tenenbaum & H. Pollard, “Ordinary Differential Equations”, Dover 1963, pp. 59
# indirect doctest
Examples
>>> from sympy import Function, pprint, dsolve >>> from sympy.abc import x >>> f = Function('f') >>> pprint(dsolve(2*x*f(x) + (x**2 + f(x)**2)*f(x).diff(x), f(x), ... hint='1st_homogeneous_coeff_subs_indep_div_dep', ... simplify=False)) / 2 \  3*x  log + 1  2  \f (x) / log(f(x)) = log(C1)   3
1st_linear
¶

sympy.solvers.ode.
ode_1st_linear
(eq, func, order, match)[source]¶ Solves 1st order linear differential equations.
These are differential equations of the form
\[dy/dx + P(x) y = Q(x)\text{.}\]These kinds of differential equations can be solved in a general way. The integrating factor \(e^{\int P(x) \,dx}\) will turn the equation into a separable equation. The general solution is:
>>> from sympy import Function, dsolve, Eq, pprint, diff, sin >>> from sympy.abc import x >>> f, P, Q = map(Function, ['f', 'P', 'Q']) >>> genform = Eq(f(x).diff(x) + P(x)*f(x), Q(x)) >>> pprint(genform) d P(x)*f(x) + (f(x)) = Q(x) dx >>> pprint(dsolve(genform, f(x), hint='1st_linear_Integral')) / / \      /  /         P(x) dx    P(x) dx        /  / f(x) = C1 +  Q(x)*e dx*e    \ / /
References
 http://en.wikipedia.org/wiki/Linear_differential_equation#First_order_equation
 M. Tenenbaum & H. Pollard, “Ordinary Differential Equations”, Dover 1963, pp. 92
# indirect doctest
Examples
>>> f = Function('f') >>> pprint(dsolve(Eq(x*diff(f(x), x)  f(x), x**2*sin(x)), ... f(x), '1st_linear')) f(x) = x*(C1  cos(x))
Bernoulli
¶

sympy.solvers.ode.
ode_Bernoulli
(eq, func, order, match)[source]¶ Solves Bernoulli differential equations.
These are equations of the form
\[dy/dx + P(x) y = Q(x) y^n\text{, }n \ne 1`\text{.}\]The substitution \(w = 1/y^{1n}\) will transform an equation of this form into one that is linear (see the docstring of
ode_1st_linear()
). The general solution is:>>> from sympy import Function, dsolve, Eq, pprint >>> from sympy.abc import x, n >>> f, P, Q = map(Function, ['f', 'P', 'Q']) >>> genform = Eq(f(x).diff(x) + P(x)*f(x), Q(x)*f(x)**n) >>> pprint(genform) d n P(x)*f(x) + (f(x)) = Q(x)*f (x) dx >>> pprint(dsolve(genform, f(x), hint='Bernoulli_Integral')) 1  1  n // / \ \       /  /          (1  n)*  P(x) dx  (1 + n)*  P(x) dx         /  /  f(x) = C1 + (1 + n)*  Q(x)*e dx*e      \\ / / /
Note that the equation is separable when \(n = 1\) (see the docstring of
ode_separable()
).>>> pprint(dsolve(Eq(f(x).diff(x) + P(x)*f(x), Q(x)*f(x)), f(x), ... hint='separable_Integral')) f(x) /  /  1    dy = C1 +  (P(x) + Q(x)) dx  y   / /
References
 http://en.wikipedia.org/wiki/Bernoulli_differential_equation
 M. Tenenbaum & H. Pollard, “Ordinary Differential Equations”, Dover 1963, pp. 95
# indirect doctest
Examples
>>> from sympy import Function, dsolve, Eq, pprint, log >>> from sympy.abc import x >>> f = Function('f')
>>> pprint(dsolve(Eq(x*f(x).diff(x) + f(x), log(x)*f(x)**2), ... f(x), hint='Bernoulli')) 1 f(x) =  / log(x) 1\ x*C1 +  +  \ x x/
Liouville
¶

sympy.solvers.ode.
ode_Liouville
(eq, func, order, match)[source]¶ Solves 2nd order Liouville differential equations.
The general form of a Liouville ODE is
\[\frac{d^2 y}{dx^2} + g(y) \left(\! \frac{dy}{dx}\!\right)^2 + h(x) \frac{dy}{dx}\text{.}\]The general solution is:
>>> from sympy import Function, dsolve, Eq, pprint, diff >>> from sympy.abc import x >>> f, g, h = map(Function, ['f', 'g', 'h']) >>> genform = Eq(diff(f(x),x,x) + g(f(x))*diff(f(x),x)**2 + ... h(x)*diff(f(x),x), 0) >>> pprint(genform) 2 2 /d \ d d g(f(x))*(f(x)) + h(x)*(f(x)) + (f(x)) = 0 \dx / dx 2 dx >>> pprint(dsolve(genform, f(x), hint='Liouville_Integral')) f(x) / /    /  /        h(x) dx   g(y) dy      /  / C1 + C2*  e dx +  e dy = 0   / /
References
 Goldstein and Braun, “Advanced Methods for the Solution of Differential Equations”, pp. 98
 http://www.maplesoft.com/support/help/Maple/view.aspx?path=odeadvisor/Liouville
# indirect doctest
Examples
>>> from sympy import Function, dsolve, Eq, pprint >>> from sympy.abc import x >>> f = Function('f') >>> pprint(dsolve(diff(f(x), x, x) + diff(f(x), x)**2/f(x) + ... diff(f(x), x)/x, f(x), hint='Liouville')) ________________ ________________ [f(x) = \/ C1 + C2*log(x) , f(x) = \/ C1 + C2*log(x) ]
Riccati_special_minus2
¶

sympy.solvers.ode.
ode_Riccati_special_minus2
(eq, func, order, match)[source]¶ The general Riccati equation has the form
\[dy/dx = f(x) y^2 + g(x) y + h(x)\text{.}\]While it does not have a general solution [1], the “special” form, \(dy/dx = a y^2  b x^c\), does have solutions in many cases [2]. This routine returns a solution for \(a(dy/dx) = b y^2 + c y/x + d/x^2\) that is obtained by using a suitable change of variables to reduce it to the special form and is valid when neither \(a\) nor \(b\) are zero and either \(c\) or \(d\) is zero.
>>> from sympy.abc import x, y, a, b, c, d >>> from sympy.solvers.ode import dsolve, checkodesol >>> from sympy import pprint, Function >>> f = Function('f') >>> y = f(x) >>> genform = a*y.diff(x)  (b*y**2 + c*y/x + d/x**2) >>> sol = dsolve(genform, y) >>> pprint(sol, wrap_line=False) / / __________________ \\  __________________  / 2   / 2  \/ 4*b*d  (a + c) *log(x) a + c  \/ 4*b*d  (a + c) *tanC1 +  \ \ 2*a // f(x) =  2*b*x
>>> checkodesol(genform, sol, order=1)[0] True
References
nth_linear_constant_coeff_homogeneous
¶

sympy.solvers.ode.
ode_nth_linear_constant_coeff_homogeneous
(eq, func, order, match, returns='sol')[source]¶ Solves an \(n\)th order linear homogeneous differential equation with constant coefficients.
This is an equation of the form
\[a_n f^{(n)}(x) + a_{n1} f^{(n1)}(x) + \cdots + a_1 f'(x) + a_0 f(x) = 0\text{.}\]These equations can be solved in a general manner, by taking the roots of the characteristic equation \(a_n m^n + a_{n1} m^{n1} + \cdots + a_1 m + a_0 = 0\). The solution will then be the sum of \(C_n x^i e^{r x}\) terms, for each where \(C_n\) is an arbitrary constant, \(r\) is a root of the characteristic equation and \(i\) is one of each from 0 to the multiplicity of the root  1 (for example, a root 3 of multiplicity 2 would create the terms \(C_1 e^{3 x} + C_2 x e^{3 x}\)). The exponential is usually expanded for complex roots using Euler’s equation \(e^{I x} = \cos(x) + I \sin(x)\). Complex roots always come in conjugate pairs in polynomials with real coefficients, so the two roots will be represented (after simplifying the constants) as \(e^{a x} \left(C_1 \cos(b x) + C_2 \sin(b x)\right)\).
If SymPy cannot find exact roots to the characteristic equation, a
CRootOf
instance will be return instead.>>> from sympy import Function, dsolve, Eq >>> from sympy.abc import x >>> f = Function('f') >>> dsolve(f(x).diff(x, 5) + 10*f(x).diff(x)  2*f(x), f(x), ... hint='nth_linear_constant_coeff_homogeneous') ... Eq(f(x), C1*exp(x*CRootOf(_x**5 + 10*_x  2, 0)) + C2*exp(x*CRootOf(_x**5 + 10*_x  2, 1)) + C3*exp(x*CRootOf(_x**5 + 10*_x  2, 2)) + C4*exp(x*CRootOf(_x**5 + 10*_x  2, 3)) + C5*exp(x*CRootOf(_x**5 + 10*_x  2, 4)))
Note that because this method does not involve integration, there is no
nth_linear_constant_coeff_homogeneous_Integral
hint.The following is for internal use:
returns = 'sol'
returns the solution to the ODE.returns = 'list'
returns a list of linearly independent solutions, for use with non homogeneous solution methods like variation of parameters and undetermined coefficients. Note that, though the solutions should be linearly independent, this function does not explicitly check that. You can doassert simplify(wronskian(sollist)) != 0
to check for linear independence. Also,assert len(sollist) == order
will need to pass.returns = 'both'
, return a dictionary{'sol': <solution to ODE>, 'list': <list of linearly independent solutions>}
.
References
 http://en.wikipedia.org/wiki/Linear_differential_equation section: Nonhomogeneous_equation_with_constant_coefficients
 M. Tenenbaum & H. Pollard, “Ordinary Differential Equations”, Dover 1963, pp. 211
# indirect doctest
Examples
>>> from sympy import Function, dsolve, pprint >>> from sympy.abc import x >>> f = Function('f') >>> pprint(dsolve(f(x).diff(x, 4) + 2*f(x).diff(x, 3)  ... 2*f(x).diff(x, 2)  6*f(x).diff(x) + 5*f(x), f(x), ... hint='nth_linear_constant_coeff_homogeneous')) x 2*x f(x) = (C1 + C2*x)*e + (C3*sin(x) + C4*cos(x))*e
nth_linear_constant_coeff_undetermined_coefficients
¶

sympy.solvers.ode.
ode_nth_linear_constant_coeff_undetermined_coefficients
(eq, func, order, match)[source]¶ Solves an \(n\)th order linear differential equation with constant coefficients using the method of undetermined coefficients.
This method works on differential equations of the form
\[a_n f^{(n)}(x) + a_{n1} f^{(n1)}(x) + \cdots + a_1 f'(x) + a_0 f(x) = P(x)\text{,}\]where \(P(x)\) is a function that has a finite number of linearly independent derivatives.
Functions that fit this requirement are finite sums functions of the form \(a x^i e^{b x} \sin(c x + d)\) or \(a x^i e^{b x} \cos(c x + d)\), where \(i\) is a nonnegative integer and \(a\), \(b\), \(c\), and \(d\) are constants. For example any polynomial in \(x\), functions like \(x^2 e^{2 x}\), \(x \sin(x)\), and \(e^x \cos(x)\) can all be used. Products of \(\sin\)‘s and \(\cos\)‘s have a finite number of derivatives, because they can be expanded into \(\sin(a x)\) and \(\cos(b x)\) terms. However, SymPy currently cannot do that expansion, so you will need to manually rewrite the expression in terms of the above to use this method. So, for example, you will need to manually convert \(\sin^2(x)\) into \((1 + \cos(2 x))/2\) to properly apply the method of undetermined coefficients on it.
This method works by creating a trial function from the expression and all of its linear independent derivatives and substituting them into the original ODE. The coefficients for each term will be a system of linear equations, which are be solved for and substituted, giving the solution. If any of the trial functions are linearly dependent on the solution to the homogeneous equation, they are multiplied by sufficient \(x\) to make them linearly independent.
References
 http://en.wikipedia.org/wiki/Method_of_undetermined_coefficients
 M. Tenenbaum & H. Pollard, “Ordinary Differential Equations”, Dover 1963, pp. 221
# indirect doctest
Examples
>>> from sympy import Function, dsolve, pprint, exp, cos >>> from sympy.abc import x >>> f = Function('f') >>> pprint(dsolve(f(x).diff(x, 2) + 2*f(x).diff(x) + f(x)  ... 4*exp(x)*x**2 + cos(2*x), f(x), ... hint='nth_linear_constant_coeff_undetermined_coefficients')) / 4\  x  x 4*sin(2*x) 3*cos(2*x) f(x) = C1 + C2*x + *e   +  \ 3 / 25 25
nth_linear_constant_coeff_variation_of_parameters
¶

sympy.solvers.ode.
ode_nth_linear_constant_coeff_variation_of_parameters
(eq, func, order, match)[source]¶ Solves an \(n\)th order linear differential equation with constant coefficients using the method of variation of parameters.
This method works on any differential equations of the form
\[f^{(n)}(x) + a_{n1} f^{(n1)}(x) + \cdots + a_1 f'(x) + a_0 f(x) = P(x)\text{.}\]This method works by assuming that the particular solution takes the form
\[\sum_{x=1}^{n} c_i(x) y_i(x)\text{,}\]where \(y_i\) is the \(i\)th solution to the homogeneous equation. The solution is then solved using Wronskian’s and Cramer’s Rule. The particular solution is given by
\[\sum_{x=1}^n \left( \int \frac{W_i(x)}{W(x)} \,dx \right) y_i(x) \text{,}\]where \(W(x)\) is the Wronskian of the fundamental system (the system of \(n\) linearly independent solutions to the homogeneous equation), and \(W_i(x)\) is the Wronskian of the fundamental system with the \(i\)th column replaced with \([0, 0, \cdots, 0, P(x)]\).
This method is general enough to solve any \(n\)th order inhomogeneous linear differential equation with constant coefficients, but sometimes SymPy cannot simplify the Wronskian well enough to integrate it. If this method hangs, try using the
nth_linear_constant_coeff_variation_of_parameters_Integral
hint and simplifying the integrals manually. Also, prefer usingnth_linear_constant_coeff_undetermined_coefficients
when it applies, because it doesn’t use integration, making it faster and more reliable.Warning, using simplify=False with ‘nth_linear_constant_coeff_variation_of_parameters’ in
dsolve()
may cause it to hang, because it will not attempt to simplify the Wronskian before integrating. It is recommended that you only use simplify=False with ‘nth_linear_constant_coeff_variation_of_parameters_Integral’ for this method, especially if the solution to the homogeneous equation has trigonometric functions in it.References
 http://en.wikipedia.org/wiki/Variation_of_parameters
 http://planetmath.org/VariationOfParameters
 M. Tenenbaum & H. Pollard, “Ordinary Differential Equations”, Dover 1963, pp. 233
# indirect doctest
Examples
>>> from sympy import Function, dsolve, pprint, exp, log >>> from sympy.abc import x >>> f = Function('f') >>> pprint(dsolve(f(x).diff(x, 3)  3*f(x).diff(x, 2) + ... 3*f(x).diff(x)  f(x)  exp(x)*log(x), f(x), ... hint='nth_linear_constant_coeff_variation_of_parameters')) / 3 \  2 x *(6*log(x)  11) x f(x) = C1 + C2*x + C3*x + *e \ 36 /
separable
¶

sympy.solvers.ode.
ode_separable
(eq, func, order, match)[source]¶ Solves separable 1st order differential equations.
This is any differential equation that can be written as \(P(y) \tfrac{dy}{dx} = Q(x)\). The solution can then just be found by rearranging terms and integrating: \(\int P(y) \,dy = \int Q(x) \,dx\). This hint uses
sympy.simplify.simplify.separatevars()
as its back end, so if a separable equation is not caught by this solver, it is most likely the fault of that function.separatevars()
is smart enough to do most expansion and factoring necessary to convert a separable equation \(F(x, y)\) into the proper form \(P(x)\cdot{}Q(y)\). The general solution is:>>> from sympy import Function, dsolve, Eq, pprint >>> from sympy.abc import x >>> a, b, c, d, f = map(Function, ['a', 'b', 'c', 'd', 'f']) >>> genform = Eq(a(x)*b(f(x))*f(x).diff(x), c(x)*d(f(x))) >>> pprint(genform) d a(x)*b(f(x))*(f(x)) = c(x)*d(f(x)) dx >>> pprint(dsolve(genform, f(x), hint='separable_Integral')) f(x) / /    b(y)  c(x)   dy = C1 +   dx  d(y)  a(x)   / /
References
 M. Tenenbaum & H. Pollard, “Ordinary Differential Equations”, Dover 1963, pp. 52
# indirect doctest
Examples
>>> from sympy import Function, dsolve, Eq >>> from sympy.abc import x >>> f = Function('f') >>> pprint(dsolve(Eq(f(x)*f(x).diff(x) + x, 3*x*f(x)**2), f(x), ... hint='separable', simplify=False)) / 2 \ 2 log\3*f (x)  1/ x  = C1 +  6 2
almost_linear
¶

sympy.solvers.ode.
ode_almost_linear
(eq, func, order, match)[source]¶ Solves an almostlinear differential equation.
The general form of an almost linear differential equation is
\[f(x) g(y) y + k(x) l(y) + m(x) = 0 \text{where} l'(y) = g(y)\text{.}\]This can be solved by substituting \(l(y) = u(y)\). Making the given substitution reduces it to a linear differential equation of the form \(u' + P(x) u + Q(x) = 0\).
The general solution is
>>> from sympy import Function, dsolve, Eq, pprint >>> from sympy.abc import x, y, n >>> f, g, k, l = map(Function, ['f', 'g', 'k', 'l']) >>> genform = Eq(f(x)*(l(y).diff(y)) + k(x)*l(y) + g(x)) >>> pprint(genform) d f(x)*(l(y)) + g(x) + k(x)*l(y) = 0 dy >>> pprint(dsolve(genform, hint = 'almost_linear')) / // y*g(x) \\    for k(x) = 0   f(x)  y*k(x)       y*k(x)  f(x) l(y) = C1 + <  *e   f(x)   g(x)*e    otherwise    k(x)  \ \\ //
See also
References
 Joel Moses, “Symbolic Integration  The Stormy Decade”, Communications of the ACM, Volume 14, Number 8, August 1971, pp. 558
Examples
>>> from sympy import Function, Derivative, pprint >>> from sympy.solvers.ode import dsolve, classify_ode >>> from sympy.abc import x >>> f = Function('f') >>> d = f(x).diff(x) >>> eq = x*d + x*f(x) + 1 >>> dsolve(eq, f(x), hint='almost_linear') Eq(f(x), (C1  Ei(x))*exp(x)) >>> pprint(dsolve(eq, f(x), hint='almost_linear')) x f(x) = (C1  Ei(x))*e
linear_coefficients
¶

sympy.solvers.ode.
ode_linear_coefficients
(eq, func, order, match)[source]¶ Solves a differential equation with linear coefficients.
The general form of a differential equation with linear coefficients is
\[y' + F\left(\!\frac{a_1 x + b_1 y + c_1}{a_2 x + b_2 y + c_2}\!\right) = 0\text{,}\]where \(a_1\), \(b_1\), \(c_1\), \(a_2\), \(b_2\), \(c_2\) are constants and \(a_1 b_2  a_2 b_1 \ne 0\).
This can be solved by substituting:
\[x = x' + \frac{b_2 c_1  b_1 c_2}{a_2 b_1  a_1 b_2}\]\[y = y' + \frac{a_1 c_2  a_2 c_1}{a_2 b_1  a_1 b_2}\text{.}\]This substitution reduces the equation to a homogeneous differential equation.
See also
sympy.solvers.ode.ode_1st_homogeneous_coeff_best()
,sympy.solvers.ode.ode_1st_homogeneous_coeff_subs_indep_div_dep()
,sympy.solvers.ode.ode_1st_homogeneous_coeff_subs_dep_div_indep()
References
 Joel Moses, “Symbolic Integration  The Stormy Decade”, Communications of the ACM, Volume 14, Number 8, August 1971, pp. 558
Examples
>>> from sympy import Function, Derivative, pprint >>> from sympy.solvers.ode import dsolve, classify_ode >>> from sympy.abc import x >>> f = Function('f') >>> df = f(x).diff(x) >>> eq = (x + f(x) + 1)*df + (f(x)  6*x + 1) >>> dsolve(eq, hint='linear_coefficients') [Eq(f(x), x  sqrt(C1 + 7*x**2)  1), Eq(f(x), x + sqrt(C1 + 7*x**2)  1)] >>> pprint(dsolve(eq, hint='linear_coefficients')) ___________ ___________ / 2 / 2 [f(x) = x  \/ C1 + 7*x  1, f(x) = x + \/ C1 + 7*x  1]
separable_reduced
¶

sympy.solvers.ode.
ode_separable_reduced
(eq, func, order, match)[source]¶ Solves a differential equation that can be reduced to the separable form.
The general form of this equation is
\[y' + (y/x) H(x^n y) = 0\text{}.\]This can be solved by substituting \(u(y) = x^n y\). The equation then reduces to the separable form \(\frac{u'}{u (\mathrm{power}  H(u))}  \frac{1}{x} = 0\).
The general solution is:
>>> from sympy import Function, dsolve, Eq, pprint >>> from sympy.abc import x, n >>> f, g = map(Function, ['f', 'g']) >>> genform = f(x).diff(x) + (f(x)/x)*g(x**n*f(x)) >>> pprint(genform) / n \ d f(x)*g\x *f(x)/ (f(x)) +  dx x >>> pprint(dsolve(genform, hint='separable_reduced')) n x *f(x) /   1   dy = C1 + log(x)  y*(n  g(y))  /
See also
References
 Joel Moses, “Symbolic Integration  The Stormy Decade”, Communications of the ACM, Volume 14, Number 8, August 1971, pp. 558
Examples
>>> from sympy import Function, Derivative, pprint >>> from sympy.solvers.ode import dsolve, classify_ode >>> from sympy.abc import x >>> f = Function('f') >>> d = f(x).diff(x) >>> eq = (x  x**2*f(x))*d  f(x) >>> dsolve(eq, hint='separable_reduced') [Eq(f(x), (sqrt(C1*x**2 + 1) + 1)/x), Eq(f(x), (sqrt(C1*x**2 + 1) + 1)/x)] >>> pprint(dsolve(eq, hint='separable_reduced')) ___________ ___________ / 2 / 2  \/ C1*x + 1 + 1 \/ C1*x + 1 + 1 [f(x) = , f(x) = ] x x
lie_group
¶

sympy.solvers.ode.
ode_lie_group
(eq, func, order, match)[source]¶ This hint implements the Lie group method of solving first order differential equations. The aim is to convert the given differential equation from the given coordinate given system into another coordinate system where it becomes invariant under the oneparameter Lie group of translations. The converted ODE is quadrature and can be solved easily. It makes use of the
sympy.solvers.ode.infinitesimals()
function which returns the infinitesimals of the transformation.The coordinates \(r\) and \(s\) can be found by solving the following Partial Differential Equations.
\[\xi\frac{\partial r}{\partial x} + \eta\frac{\partial r}{\partial y} = 0\]\[\xi\frac{\partial s}{\partial x} + \eta\frac{\partial s}{\partial y} = 1\]The differential equation becomes separable in the new coordinate system
\[\frac{ds}{dr} = \frac{\frac{\partial s}{\partial x} + h(x, y)\frac{\partial s}{\partial y}}{ \frac{\partial r}{\partial x} + h(x, y)\frac{\partial r}{\partial y}}\]After finding the solution by integration, it is then converted back to the original coordinate system by subsituting \(r\) and \(s\) in terms of \(x\) and \(y\) again.
References
 Solving differential equations by Symmetry Groups, John Starrett, pp. 1  pp. 14
Examples
>>> from sympy import Function, dsolve, Eq, exp, pprint >>> from sympy.abc import x >>> f = Function('f') >>> pprint(dsolve(f(x).diff(x) + 2*x*f(x)  x*exp(x**2), f(x), ... hint='lie_group')) / 2\ 2  x  x f(x) = C1 + *e \ 2 /
1st_power_series
¶

sympy.solvers.ode.
ode_1st_power_series
(eq, func, order, match)[source]¶ The power series solution is a method which gives the Taylor series expansion to the solution of a differential equation.
For a first order differential equation \(\frac{dy}{dx} = h(x, y)\), a power series solution exists at a point \(x = x_{0}\) if \(h(x, y)\) is analytic at \(x_{0}\). The solution is given by
\[y(x) = y(x_{0}) + \sum_{n = 1}^{\infty} \frac{F_{n}(x_{0},b)(x  x_{0})^n}{n!},\]where \(y(x_{0}) = b\) is the value of y at the initial value of \(x_{0}\). To compute the values of the \(F_{n}(x_{0},b)\) the following algorithm is followed, until the required number of terms are generated.
 \(F_1 = h(x_{0}, b)\)
 \(F_{n+1} = \frac{\partial F_{n}}{\partial x} + \frac{\partial F_{n}}{\partial y}F_{1}\)
References
 Travis W. Walker, Analytic power series technique for solving firstorder differential equations, p.p 17, 18
Examples
>>> from sympy import Function, Derivative, pprint, exp >>> from sympy.solvers.ode import dsolve >>> from sympy.abc import x >>> f = Function('f') >>> eq = exp(x)*(f(x).diff(x))  f(x) >>> pprint(dsolve(eq, hint='1st_power_series')) 3 4 5 C1*x C1*x C1*x / 6\ f(x) = C1 + C1*x   +  +  + O\x / 6 24 60
2nd_power_series_ordinary
¶

sympy.solvers.ode.
ode_2nd_power_series_ordinary
(eq, func, order, match)[source]¶ Gives a power series solution to a second order homogeneous differential equation with polynomial coefficients at an ordinary point. A homogenous differential equation is of the form
\[P(x)\frac{d^2y}{dx^2} + Q(x)\frac{dy}{dx} + R(x) = 0\]For simplicity it is assumed that \(P(x)\), \(Q(x)\) and \(R(x)\) are polynomials, it is sufficient that \(\frac{Q(x)}{P(x)}\) and \(\frac{R(x)}{P(x)}\) exists at \(x_{0}\). A recurrence relation is obtained by substituting \(y\) as \(\sum_{n=0}^\infty a_{n}x^{n}\), in the differential equation, and equating the nth term. Using this relation various terms can be generated.
References
 http://tutorial.math.lamar.edu/Classes/DE/SeriesSolutions.aspx
 George E. Simmons, “Differential Equations with Applications and Historical Notes”, p.p 176  184
Examples
>>> from sympy import dsolve, Function, pprint >>> from sympy.abc import x, y >>> f = Function("f") >>> eq = f(x).diff(x, 2) + f(x) >>> pprint(dsolve(eq, hint='2nd_power_series_ordinary')) / 4 2 \ / 2 \ x x   x  / 6\ f(x) = C2*   + 1 + C1*x*  + 1 + O\x / \24 2 / \ 6 /
2nd_power_series_regular
¶

sympy.solvers.ode.
ode_2nd_power_series_regular
(eq, func, order, match)[source]¶ Gives a power series solution to a second order homogeneous differential equation with polynomial coefficients at a regular point. A second order homogenous differential equation is of the form
\[P(x)\frac{d^2y}{dx^2} + Q(x)\frac{dy}{dx} + R(x) = 0\]A point is said to regular singular at \(x0\) if \(x  x0\frac{Q(x)}{P(x)}\) and \((x  x0)^{2}\frac{R(x)}{P(x)}\) are analytic at \(x0\). For simplicity \(P(x)\), \(Q(x)\) and \(R(x)\) are assumed to be polynomials. The algorithm for finding the power series solutions is:
 Try expressing \((x  x0)P(x)\) and \(((x  x0)^{2})Q(x)\) as power series solutions about x0. Find \(p0\) and \(q0\) which are the constants of the power series expansions.
 Solve the indicial equation \(f(m) = m(m  1) + m*p0 + q0\), to obtain the roots \(m1\) and \(m2\) of the indicial equation.
 If \(m1  m2\) is a non integer there exists two series solutions. If \(m1 = m2\), there exists only one solution. If \(m1  m2\) is an integer, then the existence of one solution is confirmed. The other solution may or may not exist.
The power series solution is of the form \(x^{m}\sum_{n=0}^\infty a_{n}x^{n}\). The coefficients are determined by the following recurrence relation. \(a_{n} = \frac{\sum_{k=0}^{n1} q_{nk} + (m + k)p_{nk}}{f(m + n)}\). For the case in which \(m1  m2\) is an integer, it can be seen from the recurrence relation that for the lower root \(m\), when \(n\) equals the difference of both the roots, the denominator becomes zero. So if the numerator is not equal to zero, a second series solution exists.
References
 George E. Simmons, “Differential Equations with Applications and Historical Notes”, p.p 176  184
Examples
>>> from sympy import dsolve, Function, pprint >>> from sympy.abc import x, y >>> f = Function("f") >>> eq = x*(f(x).diff(x, 2)) + 2*(f(x).diff(x)) + x*f(x) >>> pprint(dsolve(eq)) / 6 4 2 \  x x x  / 4 2 \ C1*  +    + 1  x x  \ 720 24 2 / / 6\ f(x) = C2*   + 1 +  + O\x / \120 6 / x
Lie heuristics¶
These functions are intended for internal use of the Lie Group Solver. Nonetheless, they contain useful information in their docstrings on the algorithms implemented for the various heuristics.
abaco1_simple
¶

sympy.solvers.ode.
lie_heuristic_abaco1_simple
(match, comp=False)[source]¶ The first heuristic uses the following four sets of assumptions on \(\xi\) and \(\eta\)
\[\xi = 0, \eta = f(x)\]\[\xi = 0, \eta = f(y)\]\[\xi = f(x), \eta = 0\]\[\xi = f(y), \eta = 0\]The success of this heuristic is determined by algebraic factorisation. For the first assumption \(\xi = 0\) and \(\eta\) to be a function of \(x\), the PDE
\[\frac{\partial \eta}{\partial x} + (\frac{\partial \eta}{\partial y}  \frac{\partial \xi}{\partial x})*h  \frac{\partial \xi}{\partial y}*h^{2}  \xi*\frac{\partial h}{\partial x}  \eta*\frac{\partial h}{\partial y} = 0\]reduces to \(f'(x)  f\frac{\partial h}{\partial y} = 0\) If \(\frac{\partial h}{\partial y}\) is a function of \(x\), then this can usually be integrated easily. A similar idea is applied to the other 3 assumptions as well.
References
 E.S ChebTerrab, L.G.S Duarte and L.A,C.P da Mota, Computer Algebra Solving of First Order ODEs Using Symmetry Methods, pp. 8
abaco1_product
¶

sympy.solvers.ode.
lie_heuristic_abaco1_product
(match, comp=False)[source]¶ The second heuristic uses the following two assumptions on \(\xi\) and \(\eta\)
\[\eta = 0, \xi = f(x)*g(y)\]\[\eta = f(x)*g(y), \xi = 0\]The first assumption of this heuristic holds good if \(\frac{1}{h^{2}}\frac{\partial^2}{\partial x \partial y}\log(h)\) is separable in \(x\) and \(y\), then the separated factors containing \(x\) is \(f(x)\), and \(g(y)\) is obtained by
\[e^{\int f\frac{\partial}{\partial x}\left(\frac{1}{f*h}\right)\,dy}\]provided \(f\frac{\partial}{\partial x}\left(\frac{1}{f*h}\right)\) is a function of \(y\) only.
The second assumption holds good if \(\frac{dy}{dx} = h(x, y)\) is rewritten as \(\frac{dy}{dx} = \frac{1}{h(y, x)}\) and the same properties of the first assumption satisifes. After obtaining \(f(x)\) and \(g(y)\), the coordinates are again interchanged, to get \(\eta\) as \(f(x)*g(y)\)
References
 E.S. ChebTerrab, A.D. Roche, Symmetries and First Order ODE Patterns, pp. 7  pp. 8
bivariate
¶

sympy.solvers.ode.
lie_heuristic_bivariate
(match, comp=False)[source]¶ The third heuristic assumes the infinitesimals \(\xi\) and \(\eta\) to be bivariate polynomials in \(x\) and \(y\). The assumption made here for the logic below is that \(h\) is a rational function in \(x\) and \(y\) though that may not be necessary for the infinitesimals to be bivariate polynomials. The coefficients of the infinitesimals are found out by substituting them in the PDE and grouping similar terms that are polynomials and since they form a linear system, solve and check for non trivial solutions. The degree of the assumed bivariates are increased till a certain maximum value.
References
 Lie Groups and Differential Equations pp. 327  pp. 329
chi
¶

sympy.solvers.ode.
lie_heuristic_chi
(match, comp=False)[source]¶ The aim of the fourth heuristic is to find the function \(\chi(x, y)\) that satisifies the PDE \(\frac{d\chi}{dx} + h\frac{d\chi}{dx}  \frac{\partial h}{\partial y}\chi = 0\).
This assumes \(\chi\) to be a bivariate polynomial in \(x\) and \(y\). By intution, \(h\) should be a rational function in \(x\) and \(y\). The method used here is to substitute a general binomial for \(\chi\) up to a certain maximum degree is reached. The coefficients of the polynomials, are calculated by by collecting terms of the same order in \(x\) and \(y\).
After finding \(\chi\), the next step is to use \(\eta = \xi*h + \chi\), to determine \(\xi\) and \(\eta\). This can be done by dividing \(\chi\) by \(h\) which would give \(\xi\) as the quotient and \(\eta\) as the remainder.
References
 E.S ChebTerrab, L.G.S Duarte and L.A,C.P da Mota, Computer Algebra Solving of First Order ODEs Using Symmetry Methods, pp. 8
abaco2_similar
¶

sympy.solvers.ode.
lie_heuristic_abaco2_similar
(match, comp=False)[source]¶ This heuristic uses the following two assumptions on \(\xi\) and \(\eta\)
\[\eta = g(x), \xi = f(x)\]\[\eta = f(y), \xi = g(y)\]For the first assumption,
First \(\frac{\frac{\partial h}{\partial y}}{\frac{\partial^{2} h}{ \partial yy}}\) is calculated. Let us say this value is A
If this is constant, then \(h\) is matched to the form \(A(x) + B(x)e^{ \frac{y}{C}}\) then, \(\frac{e^{\int \frac{A(x)}{C} \,dx}}{B(x)}\) gives \(f(x)\) and \(A(x)*f(x)\) gives \(g(x)\)
Otherwise \(\frac{\frac{\partial A}{\partial X}}{\frac{\partial A}{ \partial Y}} = \gamma\) is calculated. If
a] \(\gamma\) is a function of \(x\) alone
b] \(\frac{\gamma\frac{\partial h}{\partial y}  \gamma'(x)  \frac{ \partial h}{\partial x}}{h + \gamma} = G\) is a function of \(x\) alone. then, \(e^{\int G \,dx}\) gives \(f(x)\) and \(\gamma*f(x)\) gives \(g(x)\)
The second assumption holds good if \(\frac{dy}{dx} = h(x, y)\) is rewritten as \(\frac{dy}{dx} = \frac{1}{h(y, x)}\) and the same properties of the first assumption satisifes. After obtaining \(f(x)\) and \(g(x)\), the coordinates are again interchanged, to get \(\xi\) as \(f(x^*)\) and \(\eta\) as \(g(y^*)\)
References
 E.S. ChebTerrab, A.D. Roche, Symmetries and First Order ODE Patterns, pp. 10  pp. 12
function_sum
¶

sympy.solvers.ode.
lie_heuristic_function_sum
(match, comp=False)[source]¶ This heuristic uses the following two assumptions on \(\xi\) and \(\eta\)
\[\eta = 0, \xi = f(x) + g(y)\]\[\eta = f(x) + g(y), \xi = 0\]The first assumption of this heuristic holds good if
\[\frac{\partial}{\partial y}[(h\frac{\partial^{2}}{ \partial x^{2}}(h^{1}))^{1}]\]is separable in \(x\) and \(y\),
 The separated factors containing \(y\) is \(\frac{\partial g}{\partial y}\). From this \(g(y)\) can be determined.
 The separated factors containing \(x\) is \(f''(x)\).
 \(h\frac{\partial^{2}}{\partial x^{2}}(h^{1})\) equals \(\frac{f''(x)}{f(x) + g(y)}\). From this \(f(x)\) can be determined.
The second assumption holds good if \(\frac{dy}{dx} = h(x, y)\) is rewritten as \(\frac{dy}{dx} = \frac{1}{h(y, x)}\) and the same properties of the first assumption satisifes. After obtaining \(f(x)\) and \(g(y)\), the coordinates are again interchanged, to get \(\eta\) as \(f(x) + g(y)\).
For both assumptions, the constant factors are separated among \(g(y)\) and \(f''(x)\), such that \(f''(x)\) obtained from 3] is the same as that obtained from 2]. If not possible, then this heuristic fails.
References
 E.S. ChebTerrab, A.D. Roche, Symmetries and First Order ODE Patterns, pp. 7  pp. 8
abaco2_unique_unknown
¶

sympy.solvers.ode.
lie_heuristic_abaco2_unique_unknown
(match, comp=False)[source]¶ This heuristic assumes the presence of unknown functions or known functions with noninteger powers.
A list of all functions and noninteger powers containing x and y
Loop over each element \(f\) in the list, find \(\frac{\frac{\partial f}{\partial x}}{ \frac{\partial f}{\partial x}} = R\)
If it is separable in \(x\) and \(y\), let \(X\) be the factors containing \(x\). Then
 a] Check if \(\xi = X\) and \(\eta = \frac{X}{R}\) satisfy the PDE. If yes, then return
\(\xi\) and \(\eta\)
 b] Check if \(\xi = \frac{R}{X}\) and \(\eta = \frac{1}{X}\) satisfy the PDE.
If yes, then return \(\xi\) and \(\eta\)
If not, then check if
a] \(\xi = R,\eta = 1\)
b] \(\xi = 1, \eta = \frac{1}{R}\)
are solutions.
References
 E.S. ChebTerrab, A.D. Roche, Symmetries and First Order ODE Patterns, pp. 10  pp. 12
abaco2_unique_general
¶

sympy.solvers.ode.
lie_heuristic_abaco2_unique_general
(match, comp=False)[source]¶ This heuristic finds if infinitesimals of the form \(\eta = f(x)\), \(\xi = g(y)\) without making any assumptions on \(h\).
The complete sequence of steps is given in the paper mentioned below.
References
 E.S. ChebTerrab, A.D. Roche, Symmetries and First Order ODE Patterns, pp. 10  pp. 12
linear
¶

sympy.solvers.ode.
lie_heuristic_linear
(match, comp=False)[source]¶ This heuristic assumes
 \(\xi = ax + by + c\) and
 \(\eta = fx + gy + h\)
After substituting the following assumptions in the determining PDE, it reduces to
\[f + (g  a)h  bh^{2}  (ax + by + c)\frac{\partial h}{\partial x}  (fx + gy + c)\frac{\partial h}{\partial y}\]Solving the reduced PDE obtained, using the method of characteristics, becomes impractical. The method followed is grouping similar terms and solving the system of linear equations obtained. The difference between the bivariate heuristic is that \(h\) need not be a rational function in this case.
References
 E.S. ChebTerrab, A.D. Roche, Symmetries and First Order ODE Patterns, pp. 10  pp. 12
System of ODEs¶
These functions are intended for internal use by
dsolve()
for system of differential equations.
system_of_odes_linear_2eq_order1_type1
¶

sympy.solvers.ode.
_linear_2eq_order1_type1
(x, y, t, r, eq)[source]¶ It is classified under system of two linear homogeneous firstorder constantcoefficient ordinary differential equations.
The equations which come under this type are
\[x' = ax + by,\]\[y' = cx + dy\]The characteristics equation is written as
\[\lambda^{2} + (a+d) \lambda + ad  bc = 0\]and its discriminant is \(D = (ad)^{2} + 4bc\). There are several cases
1. Case when \(ad  bc \neq 0\). The origin of coordinates, \(x = y = 0\), is the only stationary point; it is  a node if \(D = 0\)  a node if \(D > 0\) and \(ad  bc > 0\)  a saddle if \(D > 0\) and \(ad  bc < 0\)  a focus if \(D < 0\) and \(a + d \neq 0\)  a centre if \(D < 0\) and \(a + d \neq 0\).
1.1. If \(D > 0\). The characteristic equation has two distinct real roots \(\lambda_1\) and \(\lambda_ 2\) . The general solution of the system in question is expressed as
\[x = C_1 b e^{\lambda_1 t} + C_2 b e^{\lambda_2 t}\]\[y = C_1 (\lambda_1  a) e^{\lambda_1 t} + C_2 (\lambda_2  a) e^{\lambda_2 t}\]where \(C_1\) and \(C_2\) being arbitary constants
1.2. If \(D < 0\). The characteristics equation has two conjugate roots, \(\lambda_1 = \sigma + i \beta\) and \(\lambda_2 = \sigma  i \beta\). The general solution of the system is given by
\[x = b e^{\sigma t} (C_1 \sin(\beta t) + C_2 \cos(\beta t))\]\[y = e^{\sigma t} ([(\sigma  a) C_1  \beta C_2] \sin(\beta t) + [\beta C_1 + (\sigma  a) C_2 \cos(\beta t)])\]1.3. If \(D = 0\) and \(a \neq d\). The characteristic equation has two equal roots, \(\lambda_1 = \lambda_2\). The general solution of the system is written as
\[x = 2b (C_1 + \frac{C_2}{ad} + C_2 t) e^{\frac{a+d}{2} t}\]\[y = [(d  a) C_1 + C_2 + (d  a) C_2 t] e^{\frac{a+d}{2} t}\]1.4. If \(D = 0\) and \(a = d \neq 0\) and \(b = 0\)
\[x = C_1 e^{a t} , y = (c C_1 t + C_2) e^{a t}\]1.5. If \(D = 0\) and \(a = d \neq 0\) and \(c = 0\)
\[x = (b C_1 t + C_2) e^{a t} , y = C_1 e^{a t}\]2. Case when \(ad  bc = 0\) and \(a^{2} + b^{2} > 0\). The whole straight line \(ax + by = 0\) consists of singular points. The orginal system of differential equaitons can be rewritten as
\[x' = ax + by , y' = k (ax + by)\]2.1 If \(a + bk \neq 0\), solution will be
\[x = b C_1 + C_2 e^{(a + bk) t} , y = a C_1 + k C_2 e^{(a + bk) t}\]2.2 If \(a + bk = 0\), solution will be
\[x = C_1 (bk t  1) + b C_2 t , y = k^{2} b C_1 t + (b k^{2} t + 1) C_2\]
system_of_odes_linear_2eq_order1_type2
¶

sympy.solvers.ode.
_linear_2eq_order1_type2
(x, y, t, r, eq)[source]¶ The equations of this type are
\[x' = ax + by + k1 , y' = cx + dy + k2\]The general solution of this system is given by sum of its particular solution and the general solution of the corresponding homogeneous system is obtained from type1.
1. When \(ad  bc \neq 0\). The particular solution will be \(x = x_0\) and \(y = y_0\) where \(x_0\) and \(y_0\) are determined by solving linear system of equations
\[a x_0 + b y_0 + k1 = 0 , c x_0 + d y_0 + k2 = 0\] When \(ad  bc = 0\) and \(a^{2} + b^{2} > 0\). In this case, the system of equation becomes
\[x' = ax + by + k_1 , y' = k (ax + by) + k_2\]2.1 If \(\sigma = a + bk \neq 0\), particular solution is given by
\[x = b \sigma^{1} (c_1 k  c_2) t  \sigma^{2} (a c_1 + b c_2)\]\[y = kx + (c_2  c_1 k) t\]2.2 If \(\sigma = a + bk = 0\), particular solution is given by
\[x = \frac{1}{2} b (c_2  c_1 k) t^{2} + c_1 t\]\[y = kx + (c_2  c_1 k) t\]
system_of_odes_linear_2eq_order1_type3
¶

sympy.solvers.ode.
_linear_2eq_order1_type3
(x, y, t, r, eq)[source]¶ The equations of this type of ode are
\[x' = f(t) x + g(t) y\]\[y' = g(t) x + f(t) y\]The solution of such equations is given by
\[x = e^{F} (C_1 e^{G} + C_2 e^{G}) , y = e^{F} (C_1 e^{G}  C_2 e^{G})\]where \(C_1\) and \(C_2\) are arbitary constants, and
\[F = \int f(t) \,dt , G = \int g(t) \,dt\]
system_of_odes_linear_2eq_order1_type4
¶

sympy.solvers.ode.
_linear_2eq_order1_type4
(x, y, t, r, eq)[source]¶ The equations of this type of ode are .
\[x' = f(t) x + g(t) y\]\[y' = g(t) x + f(t) y\]The solution is given by
\[x = F (C_1 \cos(G) + C_2 \sin(G)), y = F (C_1 \sin(G) + C_2 \cos(G))\]where \(C_1\) and \(C_2\) are arbitary constants, and
\[F = \int f(t) \,dt , G = \int g(t) \,dt\]
system_of_odes_linear_2eq_order1_type5
¶

sympy.solvers.ode.
_linear_2eq_order1_type5
(x, y, t, r, eq)[source]¶ The equations of this type of ode are .
\[x' = f(t) x + g(t) y\]\[y' = a g(t) x + [f(t) + b g(t)] y\]The transformation of
\[x = e^{\int f(t) \,dt} u , y = e^{\int f(t) \,dt} v , T = \int g(t) \,dt\]leads to a system of constant coefficient linear differential equations
\[u'(T) = v , v'(T) = au + bv\]
system_of_odes_linear_2eq_order1_type6
¶

sympy.solvers.ode.
_linear_2eq_order1_type6
(x, y, t, r, eq)[source]¶ The equations of this type of ode are .
\[x' = f(t) x + g(t) y\]\[y' = a [f(t) + a h(t)] x + a [g(t)  h(t)] y\]This is solved by first multiplying the first equation by \(a\) and adding it to the second equation to obtain
\[y'  a x' = a h(t) (y  a x)\]Setting \(U = y  ax\) and integrating the equation we arrive at
\[y  ax = C_1 e^{a \int h(t) \,dt}\]and on substituing the value of y in first equation give rise to first order ODEs. After solving for \(x\), we can obtain \(y\) by substituting the value of \(x\) in second equation.
system_of_odes_linear_2eq_order1_type7
¶

sympy.solvers.ode.
_linear_2eq_order1_type7
(x, y, t, r, eq)[source]¶ The equations of this type of ode are .
\[x' = f(t) x + g(t) y\]\[y' = h(t) x + p(t) y\]Differentiating the first equation and substituting the value of \(y\) from second equation will give a secondorder linear equation
\[g x''  (fg + gp + g') x' + (fgp  g^{2} h + f g'  f' g) x = 0\]This above equation can be easily integrated if following conditions are satisfied.
 \(fgp  g^{2} h + f g'  f' g = 0\)
 \(fgp  g^{2} h + f g'  f' g = ag, fg + gp + g' = bg\)
If first condition is satisfied then it is solved by current dsolve solver and in second case it becomes a constant cofficient differential equation which is also solved by current solver.
Otherwise if the above condition fails then, a particular solution is assumed as \(x = x_0(t)\) and \(y = y_0(t)\) Then the general solution is expressed as
\[x = C_1 x_0(t) + C_2 x_0(t) \int \frac{g(t) F(t) P(t)}{x_0^{2}(t)} \,dt\]\[y = C_1 y_0(t) + C_2 [\frac{F(t) P(t)}{x_0(t)} + y_0(t) \int \frac{g(t) F(t) P(t)}{x_0^{2}(t)} \,dt]\]where C1 and C2 are arbitary constants and
\[F(t) = e^{\int f(t) \,dt} , P(t) = e^{\int p(t) \,dt}\]
system_of_odes_linear_2eq_order2_type1
¶

sympy.solvers.ode.
_linear_2eq_order2_type1
(x, y, t, r, eq)[source]¶ System of two constantcoefficient secondorder linear homogeneous differential equations
\[x'' = ax + by\]\[y'' = cx + dy\]The charecteristic equation for above equations
\[\lambda^4  (a + d) \lambda^2 + ad  bc = 0\]whose discriminant is \(D = (a  d)^2 + 4bc \neq 0\)
 When \(ad  bc \neq 0\)
1.1. If \(D \neq 0\). The characteristic equation has four distict roots, \(\lambda_1, \lambda_2, \lambda_3, \lambda_4\). The general solution of the system is
\[x = C_1 b e^{\lambda_1 t} + C_2 b e^{\lambda_2 t} + C_3 b e^{\lambda_3 t} + C_4 b e^{\lambda_4 t}\]\[y = C_1 (\lambda_1^{2}  a) e^{\lambda_1 t} + C_2 (\lambda_2^{2}  a) e^{\lambda_2 t} + C_3 (\lambda_3^{2}  a) e^{\lambda_3 t} + C_4 (\lambda_4^{2}  a) e^{\lambda_4 t}\]where \(C_1,..., C_4\) are arbitary constants.
1.2. If \(D = 0\) and \(a \neq d\):
\[x = 2 C_1 (bt + \frac{2bk}{a  d}) e^{\frac{kt}{2}} + 2 C_2 (bt + \frac{2bk}{a  d}) e^{\frac{kt}{2}} + 2b C_3 t e^{\frac{kt}{2}} + 2b C_4 t e^{\frac{kt}{2}}\]\[y = C_1 (d  a) t e^{\frac{kt}{2}} + C_2 (d  a) t e^{\frac{kt}{2}} + C_3 [(d  a) t + 2k] e^{\frac{kt}{2}} + C_4 [(d  a) t  2k] e^{\frac{kt}{2}}\]where \(C_1,..., C_4\) are arbitary constants and \(k = \sqrt{2 (a + d)}\)
1.3. If \(D = 0\) and \(a = d \neq 0\) and \(b = 0\):
\[x = 2 \sqrt{a} C_1 e^{\sqrt{a} t} + 2 \sqrt{a} C_2 e^{\sqrt{a} t}\]\[y = c C_1 t e^{\sqrt{a} t}  c C_2 t e^{\sqrt{a} t} + C_3 e^{\sqrt{a} t} + C_4 e^{\sqrt{a} t}\]1.4. If \(D = 0\) and \(a = d \neq 0\) and \(c = 0\):
\[x = b C_1 t e^{\sqrt{a} t}  b C_2 t e^{\sqrt{a} t} + C_3 e^{\sqrt{a} t} + C_4 e^{\sqrt{a} t}\]\[y = 2 \sqrt{a} C_1 e^{\sqrt{a} t} + 2 \sqrt{a} C_2 e^{\sqrt{a} t}\] When \(ad  bc = 0\) and \(a^2 + b^2 > 0\). Then the original system becomes
\[x'' = ax + by\]\[y'' = k (ax + by)\]2.1. If \(a + bk \neq 0\):
\[x = C_1 e^{t \sqrt{a + bk}} + C_2 e^{t \sqrt{a + bk}} + C_3 bt + C_4 b\]\[y = C_1 k e^{t \sqrt{a + bk}} + C_2 k e^{t \sqrt{a + bk}}  C_3 at  C_4 a\]2.2. If \(a + bk = 0\):
\[x = C_1 b t^3 + C_2 b t^2 + C_3 t + C_4\]\[y = kx + 6 C_1 t + 2 C_2\]
system_of_odes_linear_2eq_order2_type2
¶

sympy.solvers.ode.
_linear_2eq_order2_type2
(x, y, t, r, eq)[source]¶ The equations in this type are
\[x'' = a_1 x + b_1 y + c_1\]\[y'' = a_2 x + b_2 y + c_2\]The general solution of this system is given by the sum of its particular solution and the general solution of the homogeneous system. The general solution is given by the linear system of 2 equation of order 2 and type 1
1. If \(a_1 b_2  a_2 b_1 \neq 0\). A particular solution will be \(x = x_0\) and \(y = y_0\) where the constants \(x_0\) and \(y_0\) are determined by solving the linear algebraic system
\[a_1 x_0 + b_1 y_0 + c_1 = 0, a_2 x_0 + b_2 y_0 + c_2 = 0\] If \(a_1 b_2  a_2 b_1 = 0\) and \(a_1^2 + b_1^2 > 0\). In this case, the system in question becomes
\[x'' = ax + by + c_1, y'' = k (ax + by) + c_2\]2.1. If \(\sigma = a + bk \neq 0\), the particular solution will be
\[x = \frac{1}{2} b \sigma^{1} (c_1 k  c_2) t^2  \sigma^{2} (a c_1 + b c_2)\]\[y = kx + \frac{1}{2} (c_2  c_1 k) t^2\]2.2. If \(\sigma = a + bk = 0\), the particular solution will be
\[x = \frac{1}{24} b (c_2  c_1 k) t^4 + \frac{1}{2} c_1 t^2\]\[y = kx + \frac{1}{2} (c_2  c_1 k) t^2\]
system_of_odes_linear_2eq_order2_type3
¶

sympy.solvers.ode.
_linear_2eq_order2_type3
(x, y, t, r, eq)[source]¶ These type of equation is used for describing the horizontal motion of a pendulum taking into account the Earth rotation. The solution is given with \(a^2 + 4b > 0\):
\[x = C_1 \cos(\alpha t) + C_2 \sin(\alpha t) + C_3 \cos(\beta t) + C_4 \sin(\beta t)\]\[y = C_1 \sin(\alpha t) + C_2 \cos(\alpha t)  C_3 \sin(\beta t) + C_4 \cos(\beta t)\]where \(C_1,...,C_4\) and
\[\alpha = \frac{1}{2} a + \frac{1}{2} \sqrt{a^2 + 4b}, \beta = \frac{1}{2} a  \frac{1}{2} \sqrt{a^2 + 4b}\]
system_of_odes_linear_2eq_order2_type4
¶

sympy.solvers.ode.
_linear_2eq_order2_type4
(x, y, t, r, eq)[source]¶ These equations are found in the theory of oscillations
\[x'' + a_1 x' + b_1 y' + c_1 x + d_1 y = k_1 e^{i \omega t}\]\[y'' + a_2 x' + b_2 y' + c_2 x + d_2 y = k_2 e^{i \omega t}\]The general solution of this linear nonhomogeneous system of constantcoefficient differential equations is given by the sum of its particular solution and the general solution of the corresponding homogeneous system (with \(k_1 = k_2 = 0\))
 A particular solution is obtained by the method of undetermined coefficients:
\[x = A_* e^{i \omega t}, y = B_* e^{i \omega t}\]On substituting these expressions into the original system of differential equations, one arrive at a linear nonhomogeneous system of algebraic equations for the coefficients \(A\) and \(B\).
2. The general solution of the homogeneous system of differential equations is determined by a linear combination of linearly independent particular solutions determined by the method of undetermined coefficients in the form of exponentials:
\[x = A e^{\lambda t}, y = B e^{\lambda t}\]On substituting these expressions into the original system and colleting the coefficients of the unknown \(A\) and \(B\), one obtains
\[(\lambda^{2} + a_1 \lambda + c_1) A + (b_1 \lambda + d_1) B = 0\]\[(a_2 \lambda + c_2) A + (\lambda^{2} + b_2 \lambda + d_2) B = 0\]The determinant of this system must vanish for nontrivial solutions A, B to exist. This requirement results in the following characteristic equation for \(\lambda\)
\[(\lambda^2 + a_1 \lambda + c_1) (\lambda^2 + b_2 \lambda + d_2)  (b_1 \lambda + d_1) (a_2 \lambda + c_2) = 0\]If all roots \(k_1,...,k_4\) of this equation are distict, the general solution of the original system of the differential equations has the form
\[x = C_1 (b_1 \lambda_1 + d_1) e^{\lambda_1 t}  C_2 (b_1 \lambda_2 + d_1) e^{\lambda_2 t}  C_3 (b_1 \lambda_3 + d_1) e^{\lambda_3 t}  C_4 (b_1 \lambda_4 + d_1) e^{\lambda_4 t}\]\[y = C_1 (\lambda_1^{2} + a_1 \lambda_1 + c_1) e^{\lambda_1 t} + C_2 (\lambda_2^{2} + a_1 \lambda_2 + c_1) e^{\lambda_2 t} + C_3 (\lambda_3^{2} + a_1 \lambda_3 + c_1) e^{\lambda_3 t} + C_4 (\lambda_4^{2} + a_1 \lambda_4 + c_1) e^{\lambda_4 t}\]
system_of_odes_linear_2eq_order2_type5
¶

sympy.solvers.ode.
_linear_2eq_order2_type5
(x, y, t, r, eq)[source]¶ The equation which come under this catagory are
\[x'' = a (t y'  y)\]\[y'' = b (t x'  x)\]The transformation
\[u = t x'  x, b = t y'  y\]leads to the firstorder system
\[u' = atv, v' = btu\]The general solution of this system is given by
If \(ab > 0\):
\[u = C_1 a e^{\frac{1}{2} \sqrt{ab} t^2} + C_2 a e^{\frac{1}{2} \sqrt{ab} t^2}\]\[v = C_1 \sqrt{ab} e^{\frac{1}{2} \sqrt{ab} t^2}  C_2 \sqrt{ab} e^{\frac{1}{2} \sqrt{ab} t^2}\]If \(ab < 0\):
\[u = C_1 a \cos(\frac{1}{2} \sqrt{\leftab\right} t^2) + C_2 a \sin(\frac{1}{2} \sqrt{\leftab\right} t^2)\]\[v = C_1 \sqrt{\leftab\right} \sin(\frac{1}{2} \sqrt{\leftab\right} t^2) + C_2 \sqrt{\leftab\right} \cos(\frac{1}{2} \sqrt{\leftab\right} t^2)\]where \(C_1\) and \(C_2\) are arbitary constants. On substituting the value of \(u\) and \(v\) in above equations and integrating the resulting expressions, the general solution will become
\[x = C_3 t + t \int \frac{u}{t^2} \,dt, y = C_4 t + t \int \frac{u}{t^2} \,dt\]where \(C_3\) and \(C_4\) are arbitrary constants.
system_of_odes_linear_2eq_order2_type6
¶

sympy.solvers.ode.
_linear_2eq_order2_type6
(x, y, t, r, eq)[source]¶ The equations are
\[x'' = f(t) (a_1 x + b_1 y)\]\[y'' = f(t) (a_2 x + b_2 y)\]If \(k_1\) and \(k_2\) are roots of the quadratic equation
\[k^2  (a_1 + b_2) k + a_1 b_2  a_2 b_1 = 0\]Then by multiplying appropriate constants and adding together original equations we obtain two independent equations:
\[z_1'' = k_1 f(t) z_1, z_1 = a_2 x + (k_1  a_1) y\]\[z_2'' = k_2 f(t) z_2, z_2 = a_2 x + (k_2  a_1) y\]Solving the equations will give the values of \(x\) and \(y\) after obtaining the value of \(z_1\) and \(z_2\) by solving the differential equation and substuting the result.
system_of_odes_linear_2eq_order2_type7
¶

sympy.solvers.ode.
_linear_2eq_order2_type7
(x, y, t, r, eq)[source]¶ The equations are given as
\[x'' = f(t) (a_1 x' + b_1 y')\]\[y'' = f(t) (a_2 x' + b_2 y')\]If \(k_1\) and ‘k_2` are roots of the quadratic equation
\[k^2  (a_1 + b_2) k + a_1 b_2  a_2 b_1 = 0\]Then the system can be reduced by adding together the two equations multiplied by appropriate constants give following two independent equations:
\[z_1'' = k_1 f(t) z_1', z_1 = a_2 x + (k_1  a_1) y\]\[z_2'' = k_2 f(t) z_2', z_2 = a_2 x + (k_2  a_1) y\]Integrating these and returning to the original variables, one arrives at a linear algebraic system for the unknowns \(x\) and \(y\):
\[a_2 x + (k_1  a_1) y = C_1 \int e^{k_1 F(t)} \,dt + C_2\]\[a_2 x + (k_2  a_1) y = C_3 \int e^{k_2 F(t)} \,dt + C_4\]where \(C_1,...,C_4\) are arbitrary constants and \(F(t) = \int f(t) \,dt\)
system_of_odes_linear_2eq_order2_type8
¶

sympy.solvers.ode.
_linear_2eq_order2_type8
(x, y, t, r, eq)[source]¶ The equation of this catagory are
\[x'' = a f(t) (t y'  y)\]\[y'' = b f(t) (t x'  x)\]The transformation
\[u = t x'  x, v = t y'  y\]leads to the system of firstorder equations
\[u' = a t f(t) v, v' = b t f(t) u\]The general solution of this system has the form
If \(ab > 0\):
\[u = C_1 a e^{\sqrt{ab} \int t f(t) \,dt} + C_2 a e^{\sqrt{ab} \int t f(t) \,dt}\]\[v = C_1 \sqrt{ab} e^{\sqrt{ab} \int t f(t) \,dt}  C_2 \sqrt{ab} e^{\sqrt{ab} \int t f(t) \,dt}\]If \(ab < 0\):
\[u = C_1 a \cos(\sqrt{\leftab\right} \int t f(t) \,dt) + C_2 a \sin(\sqrt{\leftab\right} \int t f(t) \,dt)\]\[v = C_1 \sqrt{\leftab\right} \sin(\sqrt{\leftab\right} \int t f(t) \,dt) + C_2 \sqrt{\leftab\right} \cos(\sqrt{\leftab\right} \int t f(t) \,dt)\]where \(C_1\) and \(C_2\) are arbitary constants. On substituting the value of \(u\) and \(v\) in above equations and integrating the resulting expressions, the general solution will become
\[x = C_3 t + t \int \frac{u}{t^2} \,dt, y = C_4 t + t \int \frac{u}{t^2} \,dt\]where \(C_3\) and \(C_4\) are arbitrary constants.
system_of_odes_linear_2eq_order2_type9
¶

sympy.solvers.ode.
_linear_2eq_order2_type9
(x, y, t, r, eq)[source]¶  \[t^2 x'' + a_1 t x' + b_1 t y' + c_1 x + d_1 y = 0\]\[t^2 y'' + a_2 t x' + b_2 t y' + c_2 x + d_2 y = 0\]
These system of equations are euler type.
The substitution of \(t = \sigma e^{\tau} (\sigma \neq 0)\) leads to the system of constant coefficient linear differential equations
\[x'' + (a_1  1) x' + b_1 y' + c_1 x + d_1 y = 0\]\[y'' + a_2 x' + (b_2  1) y' + c_2 x + d_2 y = 0\]The general solution of the homogeneous system of differential equations is determined by a linear combination of linearly independent particular solutions determined by the method of undetermined coefficients in the form of exponentials
\[x = A e^{\lambda t}, y = B e^{\lambda t}\]On substituting these expressions into the original system and colleting the coefficients of the unknown \(A\) and \(B\), one obtains
\[(\lambda^{2} + (a_1  1) \lambda + c_1) A + (b_1 \lambda + d_1) B = 0\]\[(a_2 \lambda + c_2) A + (\lambda^{2} + (b_2  1) \lambda + d_2) B = 0\]The determinant of this system must vanish for nontrivial solutions A, B to exist. This requirement results in the following characteristic equation for \(\lambda\)
\[(\lambda^2 + (a_1  1) \lambda + c_1) (\lambda^2 + (b_2  1) \lambda + d_2)  (b_1 \lambda + d_1) (a_2 \lambda + c_2) = 0\]If all roots \(k_1,...,k_4\) of this equation are distict, the general solution of the original system of the differential equations has the form
\[x = C_1 (b_1 \lambda_1 + d_1) e^{\lambda_1 t}  C_2 (b_1 \lambda_2 + d_1) e^{\lambda_2 t}  C_3 (b_1 \lambda_3 + d_1) e^{\lambda_3 t}  C_4 (b_1 \lambda_4 + d_1) e^{\lambda_4 t}\]\[y = C_1 (\lambda_1^{2} + (a_1  1) \lambda_1 + c_1) e^{\lambda_1 t} + C_2 (\lambda_2^{2} + (a_1  1) \lambda_2 + c_1) e^{\lambda_2 t} + C_3 (\lambda_3^{2} + (a_1  1) \lambda_3 + c_1) e^{\lambda_3 t} + C_4 (\lambda_4^{2} + (a_1  1) \lambda_4 + c_1) e^{\lambda_4 t}\]
system_of_odes_linear_2eq_order2_type10
¶

sympy.solvers.ode.
_linear_2eq_order2_type10
(x, y, t, r, eq)[source]¶ The equation of this catagory are
\[(\alpha t^2 + \beta t + \gamma)^{2} x'' = ax + by\]\[(\alpha t^2 + \beta t + \gamma)^{2} y'' = cx + dy\]The transformation
\[\tau = \int \frac{1}{\alpha t^2 + \beta t + \gamma} \,dt , u = \frac{x}{\sqrt{\left\alpha t^2 + \beta t + \gamma\right}} , v = \frac{y}{\sqrt{\left\alpha t^2 + \beta t + \gamma\right}}\]leads to a constant coefficient linear system of equations
\[u'' = (a  \alpha \gamma + \frac{1}{4} \beta^{2}) u + b v\]\[v'' = c u + (d  \alpha \gamma + \frac{1}{4} \beta^{2}) v\]These system of equations obtained can be solved by type1 of System of two constantcoefficient secondorder linear homogeneous differential equations.
system_of_odes_linear_2eq_order2_type11
¶

sympy.solvers.ode.
_linear_2eq_order2_type11
(x, y, t, r, eq)[source]¶ The equations which comes under this type are
\[x'' = f(t) (t x'  x) + g(t) (t y'  y)\]\[y'' = h(t) (t x'  x) + p(t) (t y'  y)\]The transformation
\[u = t x'  x, v = t y'  y\]leads to the linear system of firstorder equations
\[u' = t f(t) u + t g(t) v, v' = t h(t) u + t p(t) v\]On substituting the value of \(u\) and \(v\) in transformed equation gives value of \(x\) and \(y\) as
\[x = C_3 t + t \int \frac{u}{t^2} \,dt , y = C_4 t + t \int \frac{v}{t^2} \,dt.\]where \(C_3\) and \(C_4\) are arbitrary constants.
system_of_odes_linear_3eq_order1_type1
¶

sympy.solvers.ode.
_linear_3eq_order1_type1
(x, y, z, t, r, eq)[source]¶  \[x' = ax\]\[y' = bx + cy\]\[z' = dx + ky + pz\]
Solution of such equations are forward substitution. Solving first equations gives the value of \(x\), substituting it in second and third equation and solving second equation gives \(y\) and similarly substituting \(y\) in third equation give \(z\).
\[x = C_1 e^{at}\]\[y = \frac{b C_1}{a  c} e^{at} + C_2 e^{ct}\]\[z = \frac{C_1}{a  p} (d + \frac{bk}{a  c}) e^{at} + \frac{k C_2}{c  p} e^{ct} + C_3 e^{pt}\]where \(C_1, C_2\) and \(C_3\) are arbitrary constants.
system_of_odes_linear_3eq_order1_type2
¶

sympy.solvers.ode.
_linear_3eq_order1_type2
(x, y, z, t, r, eq)[source]¶ The equations of this type are
\[x' = cy  bz\]\[y' = az  cx\]\[z' = bx  ay\] First integral:
\[ax + by + cz = A \qquad  (1)\]\[x^2 + y^2 + z^2 = B^2 \qquad  (2)\]where \(A\) and \(B\) are arbitrary constants. It follows from these integrals that the integral lines are circles formed by the intersection of the planes \((1)\) and sphere \((2)\)
 Solution:
\[x = a C_0 + k C_1 \cos(kt) + (c C_2  b C_3) \sin(kt)\]\[y = b C_0 + k C_2 \cos(kt) + (a C_2  c C_3) \sin(kt)\]\[z = c C_0 + k C_3 \cos(kt) + (b C_2  a C_3) \sin(kt)\]where \(k = \sqrt{a^2 + b^2 + c^2}\) and the four constants of integration, \(C_1,...,C_4\) are constrained by a single relation,
\[a C_1 + b C_2 + c C_3 = 0\]
system_of_odes_linear_3eq_order1_type3
¶

sympy.solvers.ode.
_linear_3eq_order1_type3
(x, y, z, t, r, eq)[source]¶ Equations of this system of ODEs
\[a x' = bc (y  z)\]\[b y' = ac (z  x)\]\[c z' = ab (x  y)\] First integral:
\[a^2 x + b^2 y + c^2 z = A\]where A is an arbitary constant. It follows that the integral lines are plane curves.
 Solution:
\[x = C_0 + k C_1 \cos(kt) + a^{1} bc (C_2  C_3) \sin(kt)\]\[y = C_0 + k C_2 \cos(kt) + a b^{1} c (C_3  C_1) \sin(kt)\]\[z = C_0 + k C_3 \cos(kt) + ab c^{1} (C_1  C_2) \sin(kt)\]where \(k = \sqrt{a^2 + b^2 + c^2}\) and the four constants of integration, \(C_1,...,C_4\) are constrained by a single relation
\[a^2 C_1 + b^2 C_2 + c^2 C_3 = 0\]
system_of_odes_linear_3eq_order1_type4
¶

sympy.solvers.ode.
_linear_3eq_order1_type4
(x, y, z, t, r, eq)[source]¶ Equations:
\[x' = (a_1 f(t) + g(t)) x + a_2 f(t) y + a_3 f(t) z\]\[y' = b_1 f(t) x + (b_2 f(t) + g(t)) y + b_3 f(t) z\]\[z' = c_1 f(t) x + c_2 f(t) y + (c_3 f(t) + g(t)) z\]The transformation
\[x = e^{\int g(t) \,dt} u, y = e^{\int g(t) \,dt} v, z = e^{\int g(t) \,dt} w, \tau = \int f(t) \,dt\]leads to the system of constant coefficient linear differential equations
\[u' = a_1 u + a_2 v + a_3 w\]\[v' = b_1 u + b_2 v + b_3 w\]\[w' = c_1 u + c_2 v + c_3 w\]These system of equations are solved by homogeneous linear system of constant coefficients of \(n\) equations of first order. Then substituting the value of \(u, v\) and \(w\) in transformed equation gives value of \(x, y\) and \(z\).
system_of_odes_linear_neq_order1_type1
¶

sympy.solvers.ode.
_linear_neq_order1_type1
(match_)[source]¶ System of n firstorder constantcoefficient linear nonhomogeneous differential equation
\[y'_k = a_{k1} y_1 + a_{k2} y_2 +...+ a_{kn} y_n; k = 1,2,...,n\]or that can be written as \(\vec{y'} = A . \vec{y}\) where \(\vec{y}\) is matrix of \(y_k\) for \(k = 1,2,...n\) and \(A\) is a \(n \times n\) matrix.
Since these equations are equivalent to a first order homogeneous linear differential equation. So the general solution will contain \(n\) linearly independent parts and solution will consist some type of exponential functions. Assuming \(y = \vec{v} e^{rt}\) is a solution of the system where \(\vec{v}\) is a vector of coefficients of \(y_1,...,y_n\). Substituting \(y\) and \(y' = r v e^{r t}\) into the equation \(\vec{y'} = A . \vec{y}\), we get
\[r \vec{v} e^{rt} = A \vec{v} e^{rt}\]\[r \vec{v} = A \vec{v}\]where \(r\) comes out to be eigenvalue of \(A\) and vector \(\vec{v}\) is the eigenvector of \(A\) corresponding to \(r\). There are three possiblities of eigenvalues of \(A\)
 \(n\) distinct real eigenvalues
 complex conjugate eigenvalues
 eigenvalues with multiplicity \(k\)
1. When all eigenvalues \(r_1,..,r_n\) are distinct with \(n\) different eigenvectors \(v_1,...v_n\) then the solution is given by
\[\vec{y} = C_1 e^{r_1 t} \vec{v_1} + C_2 e^{r_2 t} \vec{v_2} +...+ C_n e^{r_n t} \vec{v_n}\]where \(C_1,C_2,...,C_n\) are arbitrary constants.
2. When some eigenvalues are complex then in order to make the solution real, we take a llinear combination: if \(r = a + bi\) has an eigenvector \(\vec{v} = \vec{w_1} + i \vec{w_2}\) then to obtain realvalued solutions to the system, replace the complexvalued solutions \(e^{rx} \vec{v}\) with realvalued solution \(e^{ax} (\vec{w_1} \cos(bx)  \vec{w_2} \sin(bx))\) and for \(r = a  bi\) replace the solution \(e^{r x} \vec{v}\) with \(e^{ax} (\vec{w_1} \sin(bx) + \vec{w_2} \cos(bx))\)
3. If some eigenvalues are repeated. Then we get fewer than \(n\) linearly independent eigenvectors, we miss some of the solutions and need to construct the missing ones. We do this via generalized eigenvectors, vectors which are not eigenvectors but are close enough that we can use to write down the remaining solutions. For a eigenvalue \(r\) with eigenvector \(\vec{w}\) we obtain \(\vec{w_2},...,\vec{w_k}\) using
\[(A  r I) . \vec{w_2} = \vec{w}\]\[(A  r I) . \vec{w_3} = \vec{w_2}\]\[\vdots\]\[(A  r I) . \vec{w_k} = \vec{w_{k1}}\]Then the solutions to the system for the eigenspace are \(e^{rt} [\vec{w}], e^{rt} [t \vec{w} + \vec{w_2}], e^{rt} [\frac{t^2}{2} \vec{w} + t \vec{w_2} + \vec{w_3}], ...,e^{rt} [\frac{t^{k1}}{(k1)!} \vec{w} + \frac{t^{k2}}{(k2)!} \vec{w_2} +...+ t \vec{w_{k1}} + \vec{w_k}]\)
So, If \(\vec{y_1},...,\vec{y_n}\) are \(n\) solution of obtained from three categories of \(A\), then general solution to the system \(\vec{y'} = A . \vec{y}\)
\[\vec{y} = C_1 \vec{y_1} + C_2 \vec{y_2} + \cdots + C_n \vec{y_n}\]
system_of_odes_nonlinear_2eq_order1_type1
¶

sympy.solvers.ode.
_nonlinear_2eq_order1_type1
(x, y, t, eq)[source]¶ Equations:
\[x' = x^n F(x,y)\]\[y' = g(y) F(x,y)\]Solution:
\[x = \varphi(y), \int \frac{1}{g(y) F(\varphi(y),y)} \,dy = t + C_2\]where
if \(n \neq 1\)
\[\varphi = [C_1 + (1n) \int \frac{1}{g(y)} \,dy]^{\frac{1}{1n}}\]if \(n = 1\)
\[\varphi = C_1 e^{\int \frac{1}{g(y)} \,dy}\]where \(C_1\) and \(C_2\) are arbitrary constants.
system_of_odes_nonlinear_2eq_order1_type2
¶

sympy.solvers.ode.
_nonlinear_2eq_order1_type2
(x, y, t, eq)[source]¶ Equations:
\[x' = e^{\lambda x} F(x,y)\]\[y' = g(y) F(x,y)\]Solution:
\[x = \varphi(y), \int \frac{1}{g(y) F(\varphi(y),y)} \,dy = t + C_2\]where
if \(\lambda \neq 0\)
\[\varphi = \frac{1}{\lambda} log(C_1  \lambda \int \frac{1}{g(y)} \,dy)\]if \(\lambda = 0\)
\[\varphi = C_1 + \int \frac{1}{g(y)} \,dy\]where \(C_1\) and \(C_2\) are arbitrary constants.
system_of_odes_nonlinear_2eq_order1_type3
¶

sympy.solvers.ode.
_nonlinear_2eq_order1_type3
(x, y, t, eq)[source]¶ Autonomous system of general form
\[x' = F(x,y)\]\[y' = G(x,y)\]Assuming \(y = y(x, C_1)\) where \(C_1\) is an arbitrary constant is the general solution of the firstorder equation
\[F(x,y) y'_x = G(x,y)\]Then the general solution of the original system of equations has the form
\[\int \frac{1}{F(x,y(x,C_1))} \,dx = t + C_1\]
system_of_odes_nonlinear_2eq_order1_type4
¶

sympy.solvers.ode.
_nonlinear_2eq_order1_type4
(x, y, t, eq)[source]¶ Equation:
\[x' = f_1(x) g_1(y) \phi(x,y,t)\]\[y' = f_2(x) g_2(y) \phi(x,y,t)\]First integral:
\[\int \frac{f_2(x)}{f_1(x)} \,dx  \int \frac{g_1(y)}{g_2(y)} \,dy = C\]where \(C\) is an arbitrary constant.
On solving the first integral for \(x\) (resp., \(y\) ) and on substituting the resulting expression into either equation of the original solution, one arrives at a firsorder equation for determining \(y\) (resp., \(x\) ).
system_of_odes_nonlinear_2eq_order1_type5
¶

sympy.solvers.ode.
_nonlinear_2eq_order1_type5
(func, t, eq)[source]¶ Clairaut system of ODEs
\[x = t x' + F(x',y')\]\[y = t y' + G(x',y')\]The following are solutions of the system
\((i)\) straight lines:
\[x = C_1 t + F(C_1, C_2), y = C_2 t + G(C_1, C_2)\]where \(C_1\) and \(C_2\) are arbitrary constants;
\((ii)\) envelopes of the above lines;
\((iii)\) continuously differentiable lines made up from segments of the lines \((i)\) and \((ii)\).
system_of_odes_nonlinear_3eq_order1_type1
¶

sympy.solvers.ode.
_nonlinear_3eq_order1_type1
(x, y, z, t, eq)[source]¶ Equations:
\[a x' = (b  c) y z, \enspace b y' = (c  a) z x, \enspace c z' = (a  b) x y\]First Integrals:
\[a x^{2} + b y^{2} + c z^{2} = C_1\]\[a^{2} x^{2} + b^{2} y^{2} + c^{2} z^{2} = C_2\]where \(C_1\) and \(C_2\) are arbitrary constants. On solving the integrals for \(y\) and \(z\) and on substituting the resulting expressions into the first equation of the system, we arrives at a separable firstorder equation on \(x\). Similarly doing that for other two equations, we will arrive at first order equation on \(y\) and \(z\) too.
References
system_of_odes_nonlinear_3eq_order1_type2
¶

sympy.solvers.ode.
_nonlinear_3eq_order1_type2
(x, y, z, t, eq)[source]¶ Equations:
\[a x' = (b  c) y z f(x, y, z, t)\]\[b y' = (c  a) z x f(x, y, z, t)\]\[c z' = (a  b) x y f(x, y, z, t)\]First Integrals:
\[a x^{2} + b y^{2} + c z^{2} = C_1\]\[a^{2} x^{2} + b^{2} y^{2} + c^{2} z^{2} = C_2\]where \(C_1\) and \(C_2\) are arbitrary constants. On solving the integrals for \(y\) and \(z\) and on substituting the resulting expressions into the first equation of the system, we arrives at a firstorder differential equations on \(x\). Similarly doing that for other two equations we will arrive at first order equation on \(y\) and \(z\).
References
system_of_odes_nonlinear_3eq_order1_type3
¶

sympy.solvers.ode.
_nonlinear_3eq_order1_type3
(x, y, z, t, eq)[source]¶ Equations:
\[x' = c F_2  b F_3, \enspace y' = a F_3  c F_1, \enspace z' = b F_1  a F_2\]where \(F_n = F_n(x, y, z, t)\).
 First Integral:
\[a x + b y + c z = C_1,\]where C is an arbitrary constant.
2. If we assume function \(F_n\) to be independent of \(t\),i.e, \(F_n\) = \(F_n (x, y, z)\) Then, on eliminating \(t\) and \(z\) from the first two equation of the system, one arrives at the firstorder equation
\[\frac{dy}{dx} = \frac{a F_3 (x, y, z)  c F_1 (x, y, z)}{c F_2 (x, y, z)  b F_3 (x, y, z)}\]where \(z = \frac{1}{c} (C_1  a x  b y)\)
References
system_of_odes_nonlinear_3eq_order1_type4
¶

sympy.solvers.ode.
_nonlinear_3eq_order1_type4
(x, y, z, t, eq)[source]¶ Equations:
\[x' = c z F_2  b y F_3, \enspace y' = a x F_3  c z F_1, \enspace z' = b y F_1  a x F_2\]where \(F_n = F_n (x, y, z, t)\)
 First integral:
\[a x^{2} + b y^{2} + c z^{2} = C_1\]where \(C\) is an arbitrary constant.
2. Assuming the function \(F_n\) is independent of \(t\): \(F_n = F_n (x, y, z)\). Then on eliminating \(t\) and \(z\) from the first two equations of the system, one arrives at the firstorder equation
\[\frac{dy}{dx} = \frac{a x F_3 (x, y, z)  c z F_1 (x, y, z)} {c z F_2 (x, y, z)  b y F_3 (x, y, z)}\]where \(z = \pm \sqrt{\frac{1}{c} (C_1  a x^{2}  b y^{2})}\)
References
system_of_odes_nonlinear_3eq_order1_type5
¶

sympy.solvers.ode.
_nonlinear_3eq_order1_type5
(x, y, t, eq)[source]¶  \[x' = x (c F_2  b F_3), \enspace y' = y (a F_3  c F_1), \enspace z' = z (b F_1  a F_2)\]
where \(F_n = F_n (x, y, z, t)\) and are arbitrary functions.
First Integral:
\[\leftx\right^{a} \lefty\right^{b} \leftz\right^{c} = C_1\]where \(C\) is an arbitrary constant. If the function \(F_n\) is independent of \(t\), then, by eliminating \(t\) and \(z\) from the first two equations of the system, one arrives at a firstorder equation.
References
Information on the ode module¶
This module contains dsolve()
and different helper
functions that it uses.
dsolve()
solves ordinary differential equations.
See the docstring on the various functions for their uses. Note that partial
differential equations support is in pde.py
. Note that hint functions
have docstrings describing their various methods, but they are intended for
internal use. Use dsolve(ode, func, hint=hint)
to solve an ODE using a
specific hint. See also the docstring on
dsolve()
.
Functions in this module
These are the user functions in this module:
dsolve()
 Solves ODEs.classify_ode()
 Classifies ODEs into possible hints fordsolve()
.checkodesol()
 Checks if an equation is the solution to an ODE.homogeneous_order()
 Returns the homogeneous order of an expression.infinitesimals()
 Returns the infinitesimals of the Lie group of point transformations of an ODE, such that it is invariant.ode_checkinfsol()
 Checks if the given infinitesimals are the actual infinitesimals of a first order ODE.These are the nonsolver helper functions that are for internal use. The user should use the various options to
dsolve()
to obtain the functionality provided by these functions:
odesimp()
 Does all forms of ODE simplification.ode_sol_simplicity()
 A key function for comparing solutions by simplicity.constantsimp()
 Simplifies arbitrary constants.constant_renumber()
 Renumber arbitrary constants._handle_Integral()
 Evaluate unevaluated Integrals.See also the docstrings of these functions.
Currently implemented solver methods
The following methods are implemented for solving ordinary differential
equations. See the docstrings of the various hint functions for more
information on each (run help(ode)
):
 1st order separable differential equations.
 1st order differential equations whose coefficients or \(dx\) and \(dy\) are functions homogeneous of the same order.
 1st order exact differential equations.
 1st order linear differential equations.
 1st order Bernoulli differential equations.
 Power series solutions for first order differential equations.
 Lie Group method of solving first order differential equations.
 2nd order Liouville differential equations.
 Power series solutions for second order differential equations at ordinary and regular singular points.
 \(n\)th order linear homogeneous differential equation with constant coefficients.
 \(n\)th order linear inhomogeneous differential equation with constant coefficients using the method of undetermined coefficients.
 \(n\)th order linear inhomogeneous differential equation with constant coefficients using the method of variation of parameters.
Philosophy behind this module
This module is designed to make it easy to add new ODE solving methods without
having to mess with the solving code for other methods. The idea is that
there is a classify_ode()
function, which takes in
an ODE and tells you what hints, if any, will solve the ODE. It does this
without attempting to solve the ODE, so it is fast. Each solving method is a
hint, and it has its own function, named ode_<hint>
. That function takes
in the ODE and any match expression gathered by
classify_ode()
and returns a solved result. If
this result has any integrals in it, the hint function will return an
unevaluated Integral
class.
dsolve()
, which is the user wrapper function
around all of this, will then call odesimp()
on
the result, which, among other things, will attempt to solve the equation for
the dependent variable (the function we are solving for), simplify the
arbitrary constants in the expression, and evaluate any integrals, if the hint
allows it.
How to add new solution methods
If you have an ODE that you want dsolve()
to be
able to solve, try to avoid adding special case code here. Instead, try
finding a general method that will solve your ODE, as well as others. This
way, the ode
module will become more robust, and
unhindered by special case hacks. WolphramAlpha and Maple’s
DETools[odeadvisor] function are two resources you can use to classify a
specific ODE. It is also better for a method to work with an \(n\)th order ODE
instead of only with specific orders, if possible.
To add a new method, there are a few things that you need to do. First, you
need a hint name for your method. Try to name your hint so that it is
unambiguous with all other methods, including ones that may not be implemented
yet. If your method uses integrals, also include a hint_Integral
hint.
If there is more than one way to solve ODEs with your method, include a hint
for each one, as well as a <hint>_best
hint. Your ode_<hint>_best()
function should choose the best using min with ode_sol_simplicity
as the
key argument. See
ode_1st_homogeneous_coeff_best()
, for example.
The function that uses your method will be called ode_<hint>()
, so the
hint must only use characters that are allowed in a Python function name
(alphanumeric characters and the underscore ‘_
‘ character). Include a
function for every hint, except for _Integral
hints
(dsolve()
takes care of those automatically).
Hint names should be all lowercase, unless a word is commonly capitalized
(such as Integral or Bernoulli). If you have a hint that you do not want to
run with all_Integral
that doesn’t have an _Integral
counterpart (such
as a best hint that would defeat the purpose of all_Integral
), you will
need to remove it manually in the dsolve()
code.
See also the classify_ode()
docstring for
guidelines on writing a hint name.
Determine in general how the solutions returned by your method compare with
other methods that can potentially solve the same ODEs. Then, put your hints
in the allhints
tuple in the order that they
should be called. The ordering of this tuple determines which hints are
default. Note that exceptions are ok, because it is easy for the user to
choose individual hints with dsolve()
. In
general, _Integral
variants should go at the end of the list, and
_best
variants should go before the various hints they apply to. For
example, the undetermined_coefficients
hint comes before the
variation_of_parameters
hint because, even though variation of parameters
is more general than undetermined coefficients, undetermined coefficients
generally returns cleaner results for the ODEs that it can solve than
variation of parameters does, and it does not require integration, so it is
much faster.
Next, you need to have a match expression or a function that matches the type
of the ODE, which you should put in classify_ode()
(if the match function is more than just a few lines, like
_undetermined_coefficients_match()
, it should go
outside of classify_ode()
). It should match the
ODE without solving for it as much as possible, so that
classify_ode()
remains fast and is not hindered by
bugs in solving code. Be sure to consider corner cases. For example, if your
solution method involves dividing by something, make sure you exclude the case
where that division will be 0.
In most cases, the matching of the ODE will also give you the various parts
that you need to solve it. You should put that in a dictionary (.match()
will do this for you), and add that as matching_hints['hint'] = matchdict
in the relevant part of classify_ode()
.
classify_ode()
will then send this to
dsolve()
, which will send it to your function as
the match
argument. Your function should be named ode_<hint>(eq, func,
order, match)`. If you need to send more information, put it in the ``match
dictionary. For example, if you had to substitute in a dummy variable in
classify_ode()
to match the ODE, you will need to
pass it to your function using the \(match\) dict to access it. You can access
the independent variable using func.args[0]
, and the dependent variable
(the function you are trying to solve for) as func.func
. If, while trying
to solve the ODE, you find that you cannot, raise NotImplementedError
.
dsolve()
will catch this error with the all
metahint, rather than causing the whole routine to fail.
Add a docstring to your function that describes the method employed. Like
with anything else in SymPy, you will need to add a doctest to the docstring,
in addition to real tests in test_ode.py
. Try to maintain consistency
with the other hint functions’ docstrings. Add your method to the list at the
top of this docstring. Also, add your method to ode.rst
in the
docs/src
directory, so that the Sphinx docs will pull its docstring into
the main SymPy documentation. Be sure to make the Sphinx documentation by
running make html
from within the doc directory to verify that the
docstring formats correctly.
If your solution method involves integrating, use Integral()
instead of
integrate()
. This allows the user to bypass
hard/slow integration by using the _Integral
variant of your hint. In
most cases, calling sympy.core.basic.Basic.doit()
will integrate your
solution. If this is not the case, you will need to write special code in
_handle_Integral()
. Arbitrary constants should be
symbols named C1
, C2
, and so on. All solution methods should return
an equality instance. If you need an arbitrary number of arbitrary constants,
you can use constants = numbered_symbols(prefix='C', cls=Symbol, start=1)
.
If it is possible to solve for the dependent function in a general way, do so.
Otherwise, do as best as you can, but do not call solve in your
ode_<hint>()
function. odesimp()
will attempt
to solve the solution for you, so you do not need to do that. Lastly, if your
ODE has a common simplification that can be applied to your solutions, you can
add a special case in odesimp()
for it. For
example, solutions returned from the 1st_homogeneous_coeff
hints often
have many log()
terms, so
odesimp()
calls
logcombine()
on them (it also helps to write
the arbitrary constant as log(C1)
instead of C1
in this case). Also
consider common ways that you can rearrange your solution to have
constantsimp()
take better advantage of it. It is
better to put simplification in odesimp()
than in
your method, because it can then be turned off with the simplify flag in
dsolve()
. If you have any extraneous
simplification in your function, be sure to only run it using if
match.get('simplify', True):
, especially if it can be slow or if it can
reduce the domain of the solution.
Finally, as with every contribution to SymPy, your method will need to be
tested. Add a test for each method in test_ode.py
. Follow the
conventions there, i.e., test the solver using dsolve(eq, f(x),
hint=your_hint)
, and also test the solution using
checkodesol()
(you can put these in a separate
tests and skip/XFAIL if it runs too slow/doesn’t work). Be sure to call your
hint specifically in dsolve()
, that way the test
won’t be broken simply by the introduction of another matching hint. If your
method works for higher order (>1) ODEs, you will need to run sol =
constant_renumber(sol, 'C', 1, order)
for each solution, where order
is
the order of the ODE. This is because constant_renumber
renumbers the
arbitrary constants by printing order, which is platform dependent. Try to
test every corner case of your solver, including a range of orders if it is a
\(n\)th order solver, but if your solver is slow, such as if it involves hard
integration, try to keep the test run time down.
Feel free to refactor existing hints to avoid duplicating code or creating
inconsistencies. If you can show that your method exactly duplicates an
existing method, including in the simplicity and speed of obtaining the
solutions, then you can remove the old, less general method. The existing
code is tested extensively in test_ode.py
, so if anything is broken, one
of those tests will surely fail.